Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Engine fault
17-09-2014, 19:58 PM,
(This post was last modified: 17-09-2014, 20:01 PM by baba.)
Post: #1
|
|||
|
|||
Engine fault
45A0 rail pressure plausibility delivery controlled
who knows or had this error? Replaced the pump valve, rail sensor and pressure regulator. defect is the same. pressure is higher than the nominal with 200 bar. |
|||
17-09-2014, 20:31 PM,
Post: #2
|
|||
|
|||
RE: Engine fault
Remove all the injectors and check on the test bench (for example, BOSCH).
Injectors hold not the pressure and either drip into the cylinder (20%) or flows into the overflow (80%). The pressure regulator is trying to jump equalize pressure drop - the pressure in the rail is not stable => pressure plausibility |
|||
22-05-2015, 19:20 PM,
Post: #3
|
|||
|
|||
RE: Engine fault
Like starMl said, or wrote.
|
|||
29-05-2015, 20:32 PM,
Post: #4
|
|||
|
|||
RE: Engine fault
I think that You can chek witch injector on inpa or ista/d in live data
Best Regards |
|||
30-05-2015, 10:04 AM,
Post: #5
|
|||
|
|||
RE: Engine fault
There were problems at pressure sensor wiring.
Br |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content