[sweetsam]

HI ALL MEMBER FOR AVDI COMMANDER OWNERS YOU CAN SCAN BMW CARS USING AVDI TOOL AS PASSTHRU DEVISE WORKING WITH Rheingold SYSTEM


1. INSTALL Rheingold SYSTEM AND ITS REQUIREMENT
2. INSTALL INPA SOFTWARE (BMW Standard Tools 2.12) SET PORT FOR USB NUMBER 9
3. INSTALL AVDI COMMON SETUP AND PASSTHRU SETUP
4. INSTALL pttbmw_2.1.0.0 (TO CONNECT AVDI AS PASSTHRU DEVICE )


NOW AFTER INSTALAION COMPLETE DO SOME CONFIGURATION

OPEN START>ALL PROGRAMS>BMWPASSTHRUD2.1.0.0>PASSTHRUD CONFIGURATION.......SELECT YOUR AVDI PT AND CHECK IN K-LINE BOX AND LAUNCH CONFIG.TOOL

OPEN PROGRAM FILE>BMW AG> PASSTHRUD> TAKE COPY FOR ALL FILES EXCEPT EDIBAS AND PAST IT IN C:\EDIABAS\BIN\ REPLACE ALL FILES WITH SAME NAME .
YOU NEED Ediabas-Konfigurator TO CHANGE FROM STANDARD OBD TO PASSTHRUD JUST OPEN THE LIST AND SELECT PASSTHRUD AND GO ON

NOW AVDI TOOL READY TO WORK WITH INPA ,NCEXPERT AND WINKFP
START Rheingold SYSTEM AND ACTIVAT IT AND GO TO SITTING ICON SELET VCI CONFIG IN THE LEFT SIDE (INTERFACE TYPE) TAP ON EDIABAS STANDARD SETTING AND END WITH OK

NOW ALL DONE
AND HOPE THIS WILL BE HELPFUL [/quote][/code]