Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Fxx CAN frame with temp needed!!!
12-08-2022, 21:18 PM,
Post: #8
|
|||
|
|||
RE: BMW Fxx CAN frame with temp needed!!!
monitor CAN frames from 0x1D0
standard message frames are 8 bytes. 1st byte is the engine temperature +48 degrees Celsius (example a value of 0x90 == 144 - 48 = 96°C) I may be wrong, but i believe BMW now defaults to "Engine Temperature" which is the measurement of oil temp (more efficient in my opinion) however see the second byte in the same frame.. if it's not 00 or FF, it could be the oil temp, with the 1st byte being coolant temp. hope that helps |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
BMW Fxx CAN frame with temp needed!!! - by SkeYT - 08-08-2022, 18:41 PM
RE: BMW Fxx CAN frame with temp needed!!! - by hashtagmaster - 10-08-2022, 07:30 AM
RE: BMW Fxx CAN frame with temp needed!!! - by SkeYT - 10-08-2022, 20:46 PM
RE: BMW Fxx CAN frame with temp needed!!! - by hashtagmaster - 11-08-2022, 07:47 AM
RE: BMW Fxx CAN frame with temp needed!!! - by 808AWD325xi - 21-07-2023, 20:22 PM
RE: BMW Fxx CAN frame with temp needed!!! - by pshoey - 11-08-2022, 17:52 PM
RE: BMW Fxx CAN frame with temp needed!!! - by SkeYT - 12-08-2022, 18:31 PM
RE: BMW Fxx CAN frame with temp needed!!! - by Jartsa - 12-08-2022, 20:22 PM
RE: BMW Fxx CAN frame with temp needed!!! - by BGNLouie - 12-08-2022, 21:18 PM
RE: BMW Fxx CAN frame with temp needed!!! - by bondango - 12-08-2022, 22:37 PM
RE: BMW Fxx CAN frame with temp needed!!! - by SkeYT - 22-08-2022, 20:45 PM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content