Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

CAS 3++ Flash corrupted?
17-08-2022, 18:25 PM,
Post: #11
RE: CAS 3++ Flash corrupted?
for compare bin files i take 010 editor, it is perfect
Quote this message in a reply
18-08-2022, 10:42 AM,
Post: #12
RE: CAS 3++ Flash corrupted?
Flash wrote the file on to the CAS using ACDP mini, it goes completed successfully.
However i noticed that when re writting the eeprom file, the progress goes slow up to 9%.... Then from 9% it jump foreward to finished in second, cannot even se the percentage progressed, its jut jumped to finish. Seems not the correct behavior, could it be the EEPROM chip is faulty?

Will install the CAS and report back the outcome.

Thanks everyone.
Quote this message in a reply
19-08-2022, 07:34 AM,
Post: #13
RE: CAS 3++ Flash corrupted?
That is how it works!!
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 184 53,811 24-04-2024, 14:49 PM
Last Post: Bag3ban1
  Flash CAS 3 for disable ELV UnFan 3 243 19-04-2024, 08:20 AM
Last Post: ravager
XZBMW Flash MPPK software 20D B47 (Esys) ruben_17non 5 617 10-04-2024, 21:38 PM
Last Post: ruben_17non
XZBMW BMW G8x M3/M4 CSL EGS flash weby 22 3,737 31-03-2024, 19:48 PM
Last Post: Erezbmwm
XZBMW m2 g87 csl flash Erezbmwm 0 151 31-03-2024, 18:46 PM
Last Post: Erezbmwm
  CCC flash WINKFP ICOM BimmerSLO 9 399 29-03-2024, 19:17 PM
Last Post: Hoborg
XZBMW E84 X1 25d with 8hp45x how to flash Alp*na or other EGS hasn38 0 127 23-03-2024, 00:26 AM
Last Post: hasn38
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,557 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW DKOMBI2 G12 FLASH DUMP sebastianfernandes 2 274 03-03-2024, 06:46 AM
Last Post: sebastianfernandes
  E114A3 Error SeatBelt Acsm Issue after flash Billyjoe69 2 328 20-02-2024, 17:09 PM
Last Post: cedchung

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content