Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
04-10-2014, 14:31 PM,
Post: #11
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
Beemerboy88
If you can explain how to connect to this system ICOM
I did everything according to the instructions and my Connect Menager not see ICOM
my ICOM is the first version has the last firmware that is here on the forum
Rheingold 3,44,5 works OK
ISTA-P does not see the ICOM
Not know what is wrong
Quote this message in a reply
04-10-2014, 15:21 PM,
Post: #12
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
(04-10-2014, 14:31 PM)IM6 Wrote:  Beemerboy88
If you can explain how to connect to this system ICOM
I did everything according to the instructions and my Connect Menager not see ICOM
my ICOM is the first version has the last firmware that is here on the forum
Rheingold 3,44,5 works OK
ISTA-P does not see the ICOM
Not know what is wrong

ensure firewall is disabled.

also post a screenshot of the contents of your installed wsm data folder and also screenshot of your network connections:

*:\apps\WSM\apps\agent\data\
Quote this message in a reply
04-10-2014, 16:34 PM,
Post: #13
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
(04-10-2014, 15:21 PM)beemerboy88 Wrote:  
(04-10-2014, 14:31 PM)IM6 Wrote:  Beemerboy88
If you can explain how to connect to this system ICOM
I did everything according to the instructions and my Connect Menager not see ICOM
my ICOM is the first version has the last firmware that is here on the forum
Rheingold 3,44,5 works OK
ISTA-P does not see the ICOM
Not know what is wrong

ensure firewall is disabled.

also post a screenshot of the contents of your installed wsm data folder and also screenshot of your network connections:

*:\apps\WSM\apps\agent\data\


Attached Files
rsz_wp_000379.jpg
File Type: .jpg
Downloaded: 130 times
Size: 134.58 KB

rsz_wp_000383.jpg
File Type: .jpg
Downloaded: 136 times
Size: 178.29 KB

rsz_wp_000384.jpg
File Type: .jpg
Downloaded: 113 times
Size: 345.3 KB

rsz_wp_000385.jpg
File Type: .jpg
Downloaded: 104 times
Size: 279.02 KB

rsz_wp_000386.jpg
File Type: .jpg
Downloaded: 112 times
Size: 268.61 KB

Quote this message in a reply
04-10-2014, 18:24 PM,
Post: #14
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
(04-10-2014, 16:34 PM)IM6 Wrote:  
(04-10-2014, 15:21 PM)beemerboy88 Wrote:  
(04-10-2014, 14:31 PM)IM6 Wrote:  Beemerboy88
If you can explain how to connect to this system ICOM
I did everything according to the instructions and my Connect Menager not see ICOM
my ICOM is the first version has the last firmware that is here on the forum
Rheingold 3,44,5 works OK
ISTA-P does not see the ICOM
Not know what is wrong

ensure firewall is disabled.

also post a screenshot of the contents of your installed wsm data folder and also screenshot of your network connections:

*:\apps\WSM\apps\agent\data\

Cannot see any problems in your screenshots so should work.

One possibility - because you are using c: drive there is another apps folder that you need to copy and overwrite some existing files in the large 70gb apps folder. Did you do that? (see step 3 of the c: drive install instructions).
Quote this message in a reply
04-10-2014, 19:02 PM,
Post: #15
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
Hi, something is wrong with file settings for Drive C since installed it on lenovo T410 Drive C same problem with ICOM A1 clone (doesn't appear even that all install instructions are followed), while at other lap installed it on drive D all working.


Regards.
Quote this message in a reply
04-10-2014, 20:39 PM,
Post: #16
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
I do not know how you managed to run it. I tried it on C: and E: Unfortunately, nothing starts ...
Quote this message in a reply
05-10-2014, 00:38 AM,
Post: #17
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
(04-10-2014, 18:24 PM)beemerboy88 Wrote:  
(04-10-2014, 16:34 PM)IM6 Wrote:  
(04-10-2014, 15:21 PM)beemerboy88 Wrote:  
(04-10-2014, 14:31 PM)IM6 Wrote:  Beemerboy88
If you can explain how to connect to this system ICOM
I did everything according to the instructions and my Connect Menager not see ICOM
my ICOM is the first version has the last firmware that is here on the forum
Rheingold 3,44,5 works OK
ISTA-P does not see the ICOM
Not know what is wrong

ensure firewall is disabled.

also post a screenshot of the contents of your installed wsm data folder and also screenshot of your network connections:

*:\apps\WSM\apps\agent\data\

Cannot see any problems in your screenshots so should work.

One possibility - because you are using c: drive there is another apps folder that you need to copy and overwrite some existing files in the large 70gb apps folder. Did you do that? (see step 3 of the c: drive install instructions).

I have to perform partitions C, D, E on one HD?
I copied the app from Ista-P to a big folder 7OGB app ONLY C:
Quote this message in a reply
05-10-2014, 01:42 AM,
Post: #18
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
(05-10-2014, 00:38 AM)IM6 Wrote:  
(04-10-2014, 18:24 PM)beemerboy88 Wrote:  
(04-10-2014, 16:34 PM)IM6 Wrote:  
(04-10-2014, 15:21 PM)beemerboy88 Wrote:  
(04-10-2014, 14:31 PM)IM6 Wrote:  Beemerboy88
If you can explain how to connect to this system ICOM
I did everything according to the instructions and my Connect Menager not see ICOM
my ICOM is the first version has the last firmware that is here on the forum
Rheingold 3,44,5 works OK
ISTA-P does not see the ICOM
Not know what is wrong

ensure firewall is disabled.

also post a screenshot of the contents of your installed wsm data folder and also screenshot of your network connections:

*:\apps\WSM\apps\agent\data\

Cannot see any problems in your screenshots so should work.

One possibility - because you are using c: drive there is another apps folder that you need to copy and overwrite some existing files in the large 70gb apps folder. Did you do that? (see step 3 of the c: drive install instructions).

I have to perform partitions C, D, E on one HD?
I copied the app from Ista-P to a big folder 7OGB app ONLY C:

The software works on C but you also need a D partition (or drive) for it to run correctly (most computers come with a D partition by default). The D partition only needs to be small example: 1GB.

I have tested it on all drives (C, D & E) and it works fine. So to clarify:

If installed on C - you need to add a D partition if you haven't already got one (can be small).

If installed on D - no need to add any other partitions

If installed on E - you need to add a D partition if you haven't already got one (can be small).

Link to free partition tool:

http://www.minitool.com/partition-manage...-home.html
Quote this message in a reply
[+] 6 users say Thank You to beemerboy88 for this post
05-10-2014, 03:51 AM,
Post: #19
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
Beemerboy88,thanks.but when i try using "Utorrent" client,i still can't downloading the "softwareBMW ISTA-P 2.53.5.003 Native + Expert mode "at all
Quote this message in a reply
05-10-2014, 04:17 AM,
Post: #20
RE: BMW ISTA-P 2.53.5.003 Native + Expert mode (09.2014)
(05-10-2014, 01:42 AM)beemerboy88 Wrote:  
(05-10-2014, 00:38 AM)IM6 Wrote:  
(04-10-2014, 18:24 PM)beemerboy88 Wrote:  
(04-10-2014, 16:34 PM)IM6 Wrote:  
(04-10-2014, 15:21 PM)beemerboy88 Wrote:  ensure firewall is disabled.

also post a screenshot of the contents of your installed wsm data folder and also screenshot of your network connections:

*:\apps\WSM\apps\agent\data\

Cannot see any problems in your screenshots so should work.

One possibility - because you are using c: drive there is another apps folder that you need to copy and overwrite some existing files in the large 70gb apps folder. Did you do that? (see step 3 of the c: drive install instructions).

I have to perform partitions C, D, E on one HD?
I copied the app from Ista-P to a big folder 7OGB app ONLY C:

The software works on C but you also need a D partition (or drive) for it to run correctly (most computers come with a D partition by default). The D partition only needs to be small example: 1GB.

I have tested it on all drives (C, D & E) and it works fine. So to clarify:

If installed on C - you need to add a D partition if you haven't already got one (can be small).

If installed on D - no need to add any other partitions

If installed on E - you need to add a D partition if you haven't already got one (can be small).

Link to free partition tool:

http://www.minitool.com/partition-manage...-home.html

I think that here lies the whole problem of
I'll try and write or work or not
thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Lowering g05 lci with ista Zenel6GT 1 13 19 minutes ago
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,655 628,180 43 minutes ago
Last Post: CarlosF11
  ista 4.46 Standalone kiranabc 33 3,153 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 47 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 377 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,419 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,499 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW G15 remember last driving mode & ECO PRO MSA memory coding duss46 7 344 26-03-2024, 18:56 PM
Last Post: duss46
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 137 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 170 26-03-2024, 05:11 AM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content