Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Laguna 2 1.9dci ECU not recognise problem
23-08-2022, 08:33 AM,
Post: #1
|
|||
|
|||
Laguna 2 1.9dci ECU not recognise problem
Hi to all,
I have problem Laguna 2 1.9DCI no comunicate with ECU Boch, other module is ok, car crank but not start. I try read with can clip, renolink, ddt4all always same. Swap with used ,from another car ECU, UCH, Card, only steering lock fill with FF. Same situation, Check fuse all ok any idea. I have gnd and +12 E3. Best regards |
|||
23-08-2022, 09:50 AM,
Post: #2
|
|||
|
|||
RE: Laguna 2 1.9dci ECU not recognise problem
Hello Friend !
you checked that you don't have a problem on the column steering? |
|||
25-08-2022, 06:41 AM,
Post: #3
|
|||
|
|||
RE: Laguna 2 1.9dci ECU not recognise problem
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Laguna 3/2012 | flavio69 | 0 | 55 |
03-04-2024, 07:54 AM Last Post: flavio69 |
|
alinace iv chinese problem | davito1 | 4 | 223 |
31-01-2024, 18:08 PM Last Post: davito1 |
|
Renault Clio5 Multimendia Problem, | kukata_83 | 12 | 816 |
12-01-2024, 13:52 PM Last Post: morfej |
|
megane 3 1.5 dci 3.4 delphi AC problem | skyrimzz | 2 | 146 |
08-11-2023, 22:20 PM Last Post: skyrimzz |
|
Renault CAN Clip problem | BMWFXX | 0 | 325 |
28-09-2023, 13:32 PM Last Post: BMWFXX |
|
Nissan Navara Crankshaft sensor Problem | spanaz1 | 4 | 454 |
12-08-2023, 15:04 PM Last Post: Clusters |
|
Autel and LaunchTech problem seeing misfire | CATAHA | 0 | 262 |
19-06-2023, 18:50 PM Last Post: CATAHA |
|
problem with programming card megane3 | bboctavian | 1 | 335 |
29-01-2023, 12:01 PM Last Post: KeeleyKaayz |
|
Master 3ph1 '17 ABS unit problem | Olgierdo83 | 0 | 284 |
16-10-2022, 14:51 PM Last Post: Olgierdo83 |
|
Solved ✔ megane 2 cabrio 1.9dci edc16c36 no communication with ecu ?? | skyrimzz | 8 | 1,030 |
31-08-2022, 21:19 PM Last Post: skyrimzz |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content