Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kangoo 1.9 dti wont start,SOLVED
04-10-2014, 21:30 PM,
Post: #1
|
|||
|
|||
Kangoo 1.9 dti wont start,SOLVED
Hello. A few days ago, I had very strange example, especially for me. The car was cranking very well, but wont start. There was two fault codes, DF017 main relay control circuit, relay cut to early-permanent, and DF 023 flywheel signal sensor circuit coherence. The second fault code was only when I was cranking the motor. I was replaced the sensor, but the car still wont start. The injection locking relay cut off supply voltage, when I was cranking the motor. I was measured relay wiring diagram, flywheel signal sensor wiring, resistance..everything as the pictures attached below..still the relay cut off. Suddenly the starter motor was dead (thank goodness), I replaced with another used one, since then the car starts as it should, I deleted fault codes with no problem.. I dont know, I suppose there is something disturbing the flywheel signal sensor, therefore the relay cut off supply voltage when I was cranking and it was a fucking STARTER MOTOR.Very strange. Problem solved, if somebody this helps
|