Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Punto 2 off immo
06-10-2014, 09:17 AM,
Post: #1
|
|||
|
|||
Punto 2 off immo
Hi Good Friends!
I have a problem with immo in Fiat punto II. I undressed IAW 59F.M2 and i don't know where i can connect with flash I have programer x-prog 5.0. When the PC is broken but I have a second IAW 59F.M3 but I don't know if it will work. |
|||
06-10-2014, 17:15 PM,
Post: #2
|
|||
|
|||
RE: Punto 2 off immo
No, you can't use a 59Fm3 instead of an m2 - a m2 just uses 1 lambda sensor and no camshaft sensor, the M3 uses a second lambda sensor and the camshaft sensor so it would generate faults because it doesn't receive signals from the missing sensors in your case....
the other way around it would work, a m2 instead of an m3 just ignores both sensors but it runs less smoothly due to less sensor inputs and slower processor. Better find another 59F m2 ecu.... |
|||
06-10-2014, 19:04 PM,
Post: #3
|
|||
|
|||
RE: Punto 2 off immo
Can i buy 59f m2 (immo off?)
or where can i find flash to connect with xprog? |
|||
06-10-2014, 20:45 PM,
Post: #4
|
|||
|
|||
RE: Punto 2 off immo
Try Willem programmer is better for the ecu.
SlaweK |
|||
07-10-2014, 07:58 AM,
Post: #5
|
|||
|
|||
RE: Punto 2 off immo
Http://www31.speedyshare.com/rm2Jx/downl...59F.MX.jpg
This is foto of IAW 59F.M2, in the picture maybe i can see flash and "where i can connect"? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content