Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E60 SZL failure After flashing (Solved by ANGEL)
|
22-09-2022, 13:06 PM,
Post: #21
|
|||
|
|||
|
RE: E60 SZL failure After flashing by Diagzone !!!
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
22-09-2022, 20:51 PM,
Post: #22
|
|||
|
|||
|
RE: E60 SZL failure After flashing by Diagzone !!!
Glad you brought it back to life!
|
|||
| Reputation: +1 - BS68 [+1] | |||
|
|
|
25-10-2022, 05:40 AM,
Post: #23
|
|||
|
|||
RE: E60 SZL failure After flashing by Diagzone !!!
(21-09-2022, 21:43 PM)ShermanBG Wrote: If the module was not replaced there was no need for recalibration. The steering column splines have missing tooth and can't be misaligned. After you assembled the car all you had to do is to make full left, full right several times and the steering angle sensor would find the exact position. Nevermind....do you have on your laptop FULLY working Tool32, WinKFP and E60 data? I might help.... HELLO YOU HAD USED THE WRONG ZB NUMBER TO FLASH THE MODULE. YOU WILL HAVE TO GET THE ZB # AND FLASH WITH WINKFP AND CODE WITH NCS EXPERT IF YOU DONT KNOW THE ZB # JUST USE ISTAP ON EXPERT MODE AND JUST FLASH THAT MODULE AND YOUR PROBLEM WILL BE SOLVE. |
|||
| Reputation: +1 - BS68 [+1] | |||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
