[TizWoz]

Latest BMW NEXT 3.47 + 54.3.002 ON Torrent

I am the only one seeding so will be slow at first

please share everywhere and seed once you have finished downloading

Torrent.txt
File Type:
Downloaded:	424 times
Size:	88 bytes

This is Files to Activate, Password will only be released once I see people seeding the torrent, it is only fair to share!!

Tools.txt
File Type:
Downloaded:	327 times
Size:	84 bytes

Here is Video How to make it happen , Please remember to put FULL SCREEN


Don't forget thanks and rep, them who do get password.

ENJOY

P A S S W O R D
   




OPTION 2
25gb
Base system ACRONIS TIB , its been booted in ahci mode in hp laptop by IXOT then swapped to dell e6410 he said all working.
i have booted in all modes in DELL D630, E5500, E4310, E6410 BUT I WOULD TRY AHCI Mode first
It was made on e6410

Missing SQLightDBs Folder from the following location

C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA

Missing data Folder from the following location

C:\ProgramData\BMW\ISPI\data\TRIC\ISTA-P\BMW\Services

Torrent2.txt
File Type:
Downloaded:	135 times
Size:	88 bytes

data files for OPTION 2 , one click installer , take about 45 mins to install istap to the acronis backup
these files are on MEGA so I suggest you use the JDOWNLOADER if browser cause problems.

files_data.txt
File Type:
Downloaded:	108 times
Size:	53 bytes

[hsuchiawen]

I can't start ISTA-D.
Error "ATTENTION !!! This device has not been registered. Please do it, before you launch the application."
I have used ID.reg, the situation is still the same.
Will there any way to solve Thank you.

I again Copy and execute ISTAGUI.exe.config、Volumeid.exe、ID.reg after the issue is resolved.

[505]

Hello.

I have an ICOM unit. Works perfectly in ISTA/P, but the ISTA/D shows the ICOM unit as Reserved.
Anyone know how Reserved can be changed to Free so I can use it for Diagnostics?

Thanks!

[tigre]

Hi, i have this working but on F-Series dont auto-detect the car, how to fix it?

[coriducu]

Hi, i have this working but on F-Series dont auto-detect the car, how to fix it?

do you use K+ D-CAN cable ?

[Inspector_Gadget]

Hello.

I have an ICOM unit. Works perfectly in ISTA/P, but the ISTA/D shows the ICOM unit as Reserved.
Anyone know how Reserved can be changed to Free so I can use it for Diagnostics?

Thanks!

take out computer firewall and reboot.

[coriducu]

Hello guys
Thanks to Mr.TizWaz for his upload and explicit video,and Mr.mattydr67 for his help in some installation steps,I was able to install all and seems to work(at least here on table,not tested on real car).
I decide to update ISTA-D to 4.38.30 and this worked too,without problem,but(cause always exist an "but") willing to open ISTA-P(I use loader v3.2 cause I have just K+D-CAN cable),loader work but right after that I get error from picture attached ,if I chose to continue,ISTA-P just hang and nothing happen,if I chose to close all,and restart application again program is working .Can this problem be solved somehow ? Not sure if is secure,and I can use ISTA-P with this problem.
Thanks in advance and hope someone can help me

[Dren1977]

Hello guys
Thanks to Mr.TizWaz for his upload and explicit video,and Mr.mattydr67 for his help in some installation steps,I was able to install all and seems to work(at least here on table,not tested on real car).
I decide to update ISTA-D to 4.38.30 and this worked too,without problem,but(cause always exist an "but") willing to open ISTA-P(I use loader v3.2 cause I have just K+D-CAN cable),loader work but right after that I get error from picture attached ,if I chose to continue,ISTA-P just hang and nothing happen,if I chose to close all,and restart application again program is working .Can this problem be solved somehow ? Not sure if is secure,and I can use ISTA-P with this problem.
Thanks in advance and hope someone can help me

answer:

install .net framework 2.0

[coriducu]

Hello guys
Thanks to Mr.TizWaz for his upload and explicit video,and Mr.mattydr67 for his help in some installation steps,I was able to install all and seems to work(at least here on table,not tested on real car).
I decide to update ISTA-D to 4.38.30 and this worked too,without problem,but(cause always exist an "but") willing to open ISTA-P(I use loader v3.2 cause I have just K+D-CAN cable),loader work but right after that I get error from picture attached ,if I chose to continue,ISTA-P just hang and nothing happen,if I chose to close all,and restart application again program is working .Can this problem be solved somehow ? Not sure if is secure,and I can use ISTA-P with this problem.
Thanks in advance and hope someone can help me

answer:

install .net framework 2.0

cannot , error : product already installed as part of the operating system

[Inspector_Gadget]

Hello guys
Thanks to Mr.TizWaz for his upload and explicit video,and Mr.mattydr67 for his help in some installation steps,I was able to install all and seems to work(at least here on table,not tested on real car).
I decide to update ISTA-D to 4.38.30 and this worked too,without problem,but(cause always exist an "but") willing to open ISTA-P(I use loader v3.2 cause I have just K+D-CAN cable),loader work but right after that I get error from picture attached ,if I chose to continue,ISTA-P just hang and nothing happen,if I chose to close all,and restart application again program is working .Can this problem be solved somehow ? Not sure if is secure,and I can use ISTA-P with this problem.
Thanks in advance and hope someone can help me

answer:

install .net framework 2.0

cannot , error : product already installed as part of the operating system

LOADER Requires Net framework 4

my guess is it is not installed in your system