Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Errors comes and after restarting car they hide
10-10-2022, 17:52 PM,
Post: #11
|
|||
|
|||
RE: Errors comes and after restarting car they hide
|
|||
10-10-2022, 18:03 PM,
(This post was last modified: 10-10-2022, 18:37 PM by bmwlover.)
Post: #12
|
|||
|
|||
RE: Errors comes and after restarting car they hide
(10-10-2022, 17:37 PM)2013m5 Wrote: As you said water on the front passenger floor. You should check the BDC pin/contact for corrosion. New bdc installed there and coded. Beside this there was not any corrosion. Lets talk about active errors. 48239c and d01b2a Why it writes eps torque sensor index faulty when sensor warks, eps makes adaptation, it sees angles? And what does it mean second error- signal invalid, tramsmotter eps. Why we see these? |
|||
10-10-2022, 20:07 PM,
Post: #13
|
|||
|
|||
RE: Errors comes and after restarting car they hide
Definitely some modules are wet or wires are wet. Need to determine which modules can cause these errors.
|
|||
13-10-2022, 12:15 PM,
Post: #14
|
|||
|
|||
RE: Errors comes and after restarting car they hide
I removed carpet from car. I have access to all connectors. Do not think that modules are wet. Contacs are cleaned but same errors there..
I replaced horns and now horn works but every other errors are left. |
|||
14-10-2022, 12:23 PM,
Post: #15
|
|||
|
|||
RE: Errors comes and after restarting car they hide
Noone knows ?
|
|||
25-10-2022, 06:33 AM,
(This post was last modified: 25-10-2022, 06:41 AM by bmwlover.)
Post: #16
|
|||
|
|||
RE: Errors comes and after restarting car they hide
Update
Found water in only tailgate control module connectors. I replaced module and cleaned wires. I think it could mess up something but replacing it did not help my errors at all. Rse, icm, bdc all were clean and no water in them or connectors. I think now I have ethernet connection because added error: ethernet connection from head unit to RSE high. Existent no. And also during test plan of eps errors, it mentions ethernet connrction too. P.s. Checked eps wires, abs wires, rse wires, all good. |
|||
27-11-2022, 14:41 PM,
Post: #17
|
|||
|
|||
RE: Errors comes and after restarting car they hide
All errors are solved buy updating software in trunk module. Strange but worked.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Help errors afther remap E91 320d 177hp | Sertyu | 0 | 63 |
29-04-2024, 16:26 PM Last Post: Sertyu |
|
EGS X3 E83 CAN ERRORS | A-BAYERS | 3 | 249 |
15-11-2023, 22:10 PM Last Post: A-BAYERS |
|
Message for navigation map errors | chang2 | 0 | 186 |
03-10-2023, 18:46 PM Last Post: chang2 |
|
F20 with SBS errors in memory | peppearci | 0 | 391 |
31-07-2023, 07:20 AM Last Post: peppearci |
|
F30 front signal errors | hero3838 | 2 | 290 |
17-06-2023, 20:54 PM Last Post: Siki78 |
|
BMW F10/F11 Multiple errors/faults | pablito94 | 10 | 809 |
07-06-2023, 06:04 AM Last Post: zeronoo |
|
INPA - reading errors with details | kimz | 5 | 519 |
28-05-2023, 23:09 PM Last Post: Enabled |
|
Initialised Flexray in ISTA+ created DSC & ICM errors | S1000RR_Neil | 5 | 735 |
25-03-2023, 16:27 PM Last Post: Siki78 |
|
Solved ✔ Erasing errors with ista d killed vtg | bmwlover | 8 | 743 |
06-01-2023, 20:33 PM Last Post: bmwlover |
|
E60 airbag light on dash but no errors on ista/inpa | claw | 12 | 1,080 |
03-11-2022, 14:44 PM Last Post: djdum |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content