[francescomicdon]

need sync dash ecu motor

the car not start after bad grounding battery and discarging i read eeprom dash 9s12 and eeprom 95320 sid206,i try ford all in one 3.2 not work ,only crank starter ford all in one, in dash led is on for 1 minute and after this time blink code 23 error for every ignition cycle on,after few minutes at try, the starter motor no longer turns ,in diag motor error u0426 in dash b10da

[JNC]

Can you translate fault to English?
Have you got Forscan?

[francescomicdon]

Can you translate fault to English?
Have you got Forscan?

yes i have forscan

U0426 Code - Invalid Data Received From Vehicle Immobilizer Control Module in motor

B10DA PATS Target Identifier: Signal Compare Failure

[malawiboy]

try reprogramming the keys its sound like its lost its coding

[Dash_Burner]

Immo relearn solution is here. You can try and report. pass pm

[francescomicdon]

Immo relearn solution is here. You can try and report. pass pm

Hi ,no have second key,

[Dash_Burner]

Immo relearn solution is here. You can try and report. pass pm

Hi ,no have second key,

Then try solution from step 4 and over

[francescomicdon]

Immo relearn solution is here. You can try and report. pass pm

Hi ,no have second key,

Then try solution from step 4 and over

i try module initialization not work