[yomismo 01]

hello
can you reset a short circuit fault on a module with ista?  

[bmwlover]

hello
can you reset a short circuit fault on a module with ista?  

Yes you can delete that error only after you fix the problem.

[dansm]

Hi
I found no such option in "ista" if you mean the FRM module.
Use the Tool32 to short circuit.

[KEIN]

hello
can you reset a short circuit fault on a module with ista?  

Hello, on the E series, you can only reset the error using tool 32 or another program (BMW Explorer). On F, G, и I - can reset through and ISTA.

[bmwlover]

hello
can you reset a short circuit fault on a module with ista?  

Hello, on the E series, you can only reset the error using tool 32 or another program (BMW Explorer). On F, G, и I - can reset through and ISTA.

What you mean in reset? Ista can delete error on e series too but problem must be solved. Is reset something different?

[KEIN]

hello
can you reset a short circuit fault on a module with ista?  

Hello, on the E series, you can only reset the error using tool 32 or another program (BMW Explorer). On F, G, и I - can reset through and ISTA.

What you mean in reset? Ista can delete error on e series too but problem must be solved. Is reset something different?

Eliminating the short circuit is not enough. The control unit has an error counter on each lamp, if the number of errors exceeds the allowable value, then the error cannot be deleted until the counter is reset.

For series E - reset via Tool32 or other programmers;
For F, G, I - there is a verification plan in ISTA.


Reset blocking in case of short circuit:

1. Open Tools32 (C:\EDIABAS\Tools32.exe);

2. Open FRM_87.prg (for FRM1) or FRM_70.prg (for FRM2/FRM3) or LM60.prg/LM_e65.prg (for LM) or fem_20.prg/bdc.prg/bdc_g05.prg/bdc_g11.prg (for FEM/BDC/BDC2/);

3. Jobe "STATUS_LAMPEN_KURZSCHLUSS_COUNTER" and double click,

in the result window to find the value equal to 50 (should be a lamp that no longer works);

4. Jobe "_RESET_KURZSCHLUSS_SPERRE" (FRM_87.prg = FRM1) or jobe "STEUERN_RESET_KURZSCHLUSSABSCHALTUNG" (FRM_70.prg = FRM2/3)

and enter as an argument: 0xFF - This is the reset value of the error of all lamps;

[GoNz0-]

I've reset light module short circuits on ISTA.

[bmwlover]

hello
can you reset a short circuit fault on a module with ista?  

Hello, on the E series, you can only reset the error using tool 32 or another program (BMW Explorer). On F, G, и I - can reset through and ISTA.

Do all modules have counters? What about eps? How to reset it?

[2013m5]

hello
can you reset a short circuit fault on a module with ista?  

Hello, on the E series, you can only reset the error using tool 32 or another program (BMW Explorer). On F, G, и I - can reset through and ISTA.

Do all modules have counters? What about eps? How to reset it?

To find out modules reset function with ISTA.
1. Run the vehicle test.
2. Select module from control units tree.
3. The reset function in diagnostic or activation “I recalled”.

[dansm]

Hello
the 2013m5 user is right . There is a reset function in the tree below the control unit.