[Regis599]

My MCU is 0d69j, can I use the 1d69j?

should work .. but if you willing to change mcu you need rom dump too ... you can try read room from old mcu anyway

Finally after a lot of work (and bad coincidences) I finally managed to write the two original mcu 0d69j of the car, the problem was in the programmers, xprog (xprog-m v5.0) and UPA, for some reason they write and read corrupting the start of the file and sometimes the medium too, I was able to do the correct writing / reading with only the ak500plus, i weld them again in the EIS, I recorded a new key and start !!!

Only two things remained pending, the car came back completely, except for the sunroof (before it worked well), can there be any relation to the service performed? Another detail is that after I recorded a second key but it did not work, although the remote control works it does not turn the ignition on, I will order new keys to try again.

I do not know how to thank you, your help and the repair of the archives, saved a lot of money.

Thank you !!!!