[ir655]

Hello everyone!

I downloaded psdzdata 4.38.30 full and fired up esys 3.39.1 to test on my car but the calculate svt targer is grayed out after reading VCM or ECU. Not able to calculate svt target at all. 

I tried connection via gateway and VIN, same issue.

Car is F11 2015 with I-level F10-22-03-560 currently and shipment is F10-14-11-505 if memeory serves correctly.

Seeing that 3.39.1 is the last version that you dont need token for flashing is my psdzdata too new or something else wrong?

[MichaelNRW]

I‘m using E-Sys 3.31.4 for flashing and currently got psdzdata 4.38.30.
Connect to the car via Gateway, go to TAL calculation, read and save the FA, activate the FA, read SVT current from ECU, check iStep shipment and choose the iStep target you want. Then calculate the SVT target.
Post a screenshot of the error, that would help us to help you.

[ir655]

I‘m using E-Sys 3.31.4 for flashing and currently got psdzdata 4.38.30.
Connect to the car via Gateway, go to TAL calculation, read and save the FA, activate the FA, read SVT current from ECU, check iStep shipment and choose the iStep target you want. Then calculate the SVT target.
Post a screenshot of the error, that would help us to help you.

Man I feel so dumb, I forgot to read FA and activate it first before reading SVT from ECU and so on. I guess I dont use esys often enough lol to keep it fresh in my mind