[ismael727]

Dear friends. Recently I bought a used bosch ME9.7 replacement ecu from eBay because the old one quit on me. Couldn't connect through OBD and when i open it, it had burnt capacitor.

Open the new ECM and swap 95080 eeprom. The thing is i now have correct VIN but dont get the start enable.

What should i do? Attached is a screenshot of Drive Authorization data stream done with a Launch X431.

Thanks in advance...

   

[ismael727]

Anyone ???? Please gimme an advice. I though immo was stored in 95080 eeprom.

[nizar-maoukil]

Hi
to solve ur problem u should clone the ecu using the bdm function
regards

[ismael727]

Hi
to solve ur problem u should clone the ecu using the bdm function
regards

So, i need to read the flash from old and write to new and it will start? Since i already swap the eeprom. I bought a fgtech v54 , waiting 4 it to arrive. Will that work?

Thanks in advance

[niknd]

Upload here eeprom file
and you need stardiagnosis
to married ecu

[ismael727]

Here is the eeprom

[niknd]

Ebay_EEprom.bin_renew.rar
File Type:
Downloaded:	35 times
Size:	308 bytes

here is renew
you need stardiagnosis
to married

[ismael727]

Could it be done offline with xentry? do i need a password?

[ismael727]

here is renew
you need stardiagnosis
to married

Which multiplexer and which version of xentry will make that offline?

[rs@chip]

The best solution is to clone your ecu BDM..eeprom+flash..then you dont need star diagnose..