[6ergsm]

Hi,

retrofit ACC Stop&Go (5DF) in 2020 G05 US 40ix. 
After coding Kafas4 to 5DF I got a fault "800AD0 KAFAS: Freischaltcode fehlt". 
I don t know what enable code is missing. In Kafas all FSC accepted. 

Only these Options in CAFD_00004102_013_005_004 will change:

PPP_ON_OFF -> to off
CCM_ON_OFF -> to off
US_ETH_OUTPUT_ON_OFF -> to off

If I let all on, no fault!
Anybody knows what is the missing enable code? Or how to solve this Problem.
System works normal!

[The CaT]

You probable need the FSC for MRR

[6ergsm]

You probable need the FSC for MRR

System works I wrote, MRR have FSC!

Kafas need code but dont know which

[BugFix]

You can do update the car with ista, after update and coding all will be good.
I can code remote without ista, but don't have any time

[maksymw]

Hi,

retrofit ACC Stop&Go (5DF) in 2020 G05 US 40ix. 
After coding Kafas4 to 5DF I got a fault "800AD0 KAFAS: Freischaltcode fehlt". 
I don t know what enable code is missing. In Kafas all FSC accepted. 

Only these Options in CAFD_00004102_013_005_004 will change:

PPP_ON_OFF -> to off
CCM_ON_OFF -> to off
US_ETH_OUTPUT_ON_OFF -> to off

If I let all on, no fault!
Anybody knows what is the missing enable code? Or how to solve this Problem.
System works normal!

Without the FSC code in the MRR, your normally active radar works? Have you tested while driving?

[6ergsm]

Hi,

retrofit ACC Stop&Go (5DF) in 2020 G05 US 40ix. 
After coding Kafas4 to 5DF I got a fault "800AD0 KAFAS: Freischaltcode fehlt". 
I don t know what enable code is missing. In Kafas all FSC accepted. 

Only these Options in CAFD_00004102_013_005_004 will change:

PPP_ON_OFF -> to off
CCM_ON_OFF -> to off
US_ETH_OUTPUT_ON_OFF -> to off

If I let all on, no fault!
Anybody knows what is the missing enable code? Or how to solve this Problem.
System works normal!

Without the FSC code in the MRR, your normally active radar works? Have you tested while driving?

Please read!
MRR have FSC, System works 100%

---

You can do update the car with ista, after update and coding all will be good.
I can code remote without ista, but don't have any tH

How to solve without ista? Tip?

[DayvG]

Hi,

retrofit ACC Stop&Go (5DF) in 2020 G05 US 40ix. 
After coding Kafas4 to 5DF I got a fault "800AD0 KAFAS: Freischaltcode fehlt". 
I don t know what enable code is missing. In Kafas all FSC accepted. 

Only these Options in CAFD_00004102_013_005_004 will change:

PPP_ON_OFF -> to off
CCM_ON_OFF -> to off
US_ETH_OUTPUT_ON_OFF -> to off

If I let all on, no fault!
Anybody knows what is the missing enable code? Or how to solve this Problem.
System works normal!

Without the FSC code in the MRR, your normally active radar works? Have you tested while driving?

Please read!
MRR have FSC, System works 100%

---

You can do update the car with ista, after update and coding all will be good.
I can code remote without ista, but don't have any tH

How to solve without ista? Tip?

I see you're being as rude and expectant as ever. Your problem becomes everyone elses, its like you bite the hand that feeds you and expect everyone to still want to help you!

[maksymw]

Hi,

retrofit ACC Stop&Go (5DF) in 2020 G05 US 40ix. 
After coding Kafas4 to 5DF I got a fault "800AD0 KAFAS: Freischaltcode fehlt". 
I don t know what enable code is missing. In Kafas all FSC accepted. 

Only these Options in CAFD_00004102_013_005_004 will change:

PPP_ON_OFF -> to off
CCM_ON_OFF -> to off
US_ETH_OUTPUT_ON_OFF -> to off

If I let all on, no fault!
Anybody knows what is the missing enable code? Or how to solve this Problem.
System works normal!

If you read my question, you'd understand that I just didn't understand something... well. I know what you are missing, I suspect that in KAFAS4 you have all the codes except for the 0x1BF code Hence this error. You probably have kafas4-mid? I can assure you that you won't do anything with this missing code error. You can't buy fsc for kafas4-mid in SA18 / G05. A week ago I had a similar problem with this error in g05, everything worked but the error was there. Online programming ISTA 4.38.30 did not help unfortunately. The funny thing is that after the ISTA scan, all fsc codes show as Accepted and the error still exists. My only suspicion that I was able to determine out of curiosity is that the codes that supposedly physically exist in kafas and are accepted are actually not like those that activate the factory options in the car. I don't know if you understand me, but what I'm aiming for is that when searching in tool32 in kafas4 and analyzing the fsc status there, I discovered that the codes that were theoretically in kafas4, despite the fact that the car did not have these functions by default, were called slightly different. It was like two types of code, I don't want to misspell it, but it was something like "factory" and "development". I myself cannot understand why my kafas had codes 0x14B and 0x14C in the repair package, which were not factory-entered in the car at all. I entered them manually via e-sys and they were accepted, although they are not exactly what the system requires. They seem to be accepted, but they cause an error because the car originally had different equipment. I suspect that's the point here.

It is very strange only what you write that you have FSC in MRR if you are just encoding 5DF and the car did not have this function by default only just as I suspect 5AQ. Can you show a picture of FSC status in MRR in e-sys? How come you have 0x149 there if you're just doing a retrofit? Something is wrong with what you are saying...

Sorry for my English, I hope you understand what I mean.

[6ergsm]

Hi,

retrofit ACC Stop&Go (5DF) in 2020 G05 US 40ix. 
After coding Kafas4 to 5DF I got a fault "800AD0 KAFAS: Freischaltcode fehlt". 
I don t know what enable code is missing. In Kafas all FSC accepted. 

Only these Options in CAFD_00004102_013_005_004 will change:

PPP_ON_OFF -> to off
CCM_ON_OFF -> to off
US_ETH_OUTPUT_ON_OFF -> to off

If I let all on, no fault!
Anybody knows what is the missing enable code? Or how to solve this Problem.
System works normal!

If you read my question, you'd understand that I just didn't understand something... well. I know what you are missing, I suspect that in KAFAS4 you have all the codes except for the 0x1BF code Hence this error. You probably have kafas4-mid? I can assure you that you won't do anything with this missing code error. You can't buy fsc for kafas4-mid in SA18 / G05. A week ago I had a similar problem with this error in g05, everything worked but the error was there. Online programming ISTA 4.38.30 did not help unfortunately. The funny thing is that after the ISTA scan, all fsc codes show as Accepted and the error still exists. My only suspicion that I was able to determine out of curiosity is that the codes that supposedly physically exist in kafas and are accepted are actually not like those that activate the factory options in the car. I don't know if you understand me, but what I'm aiming for is that when searching in tool32 in kafas4 and analyzing the fsc status there, I discovered that the codes that were theoretically in kafas4, despite the fact that the car did not have these functions by default, were called slightly different. It was like two types of code, I don't want to misspell it, but it was something like "factory" and "development".  I myself cannot understand why my kafas had codes 0x14B and 0x14C in the repair package, which were not factory-entered in the car at all. I entered them manually via e-sys and they were accepted, although they are not exactly what the system requires. They seem to be accepted, but they cause an error because the car originally had different equipment. I suspect that's the point here.

It is very strange only what you write that you have FSC in MRR if you are just encoding 5DF and the car did not have this function by default only just as I suspect 5AQ. Can you show a picture of FSC status in MRR in e-sys?  How come you have 0x149 there if you're just doing a retrofit? Something is wrong with what you are saying...

Sorry for my English, I hope you understand what I mean.

Hi maksymw,


you think that ista and tool32 have different FSC status?

Car have 5AS and 5AV from factory, no 5AQ, so all assistants system with kafas4-mid, I think. ALL Kafas FSC accepted in ista. I retrofit 5DF and put in f*** FSC - it was also accepted. But If i code KAFAS with 5DF the three options changes and the fault 800AD0 come. If I change back this three options fault gone.
For what Is FSC 0x1BF?

I'll check tomorrow kafas fsc in tool32. Maybe there I find the FSC that is not available.
I have repairpack from g05 with acc and mine. the only difference in FSC, the car with acc have 01B9 and my one have 01B1, but I do not find what is 01B9.

Thanks for help!

[img]<a href=[/img]" />

[Node]

1B1 is FLA. 1B9 is sport VDC.