Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

22-05-2015, 23:44 PM,
Post: #1
0LPG  H
Hello
I need to make one Hummer H3 2009.
How can I do this? With X-Tool ?
Thanks
Mozart dontknow
Quote this message in a reply
23-05-2015, 04:12 AM,
Post: #2
RE: Hummer H3 2009
(22-05-2015, 23:44 PM)mozart Wrote:  Hello
I need to make one Hummer H3 2009.
How can I do this? With X-Tool ?
Thanks
Mozart dontknow

You can do this car with x-tool (by eeprom progranner) and digiprog also. You must do the dash first. Remove dash and find 93c56 chip. Then you have to do BSI of this car. Remove bsi and find 95040 chip.
Reputation: +2 - mozart [+1] , Clusters [+1]
Quote this message in a reply
[+] 4 users say Thank You to Dash_Burner for this post
23-05-2015, 09:45 AM,
Post: #3
RE: Hummer H3 2009
Correct..

here a picture of bcm/bsi


Attached Files Thumbnail(s)
   
Reputation: +2 - mozart [+1] , Clusters [+1]
Quote this message in a reply
[+] 6 users say Thank You to pietje001 for this post
23-05-2015, 12:08 PM,
Post: #4
0LPG  RE: Hummer H3 2009
(23-05-2015, 04:12 AM)mpitsaxis Wrote:  
(22-05-2015, 23:44 PM)mozart Wrote:  Hello
I need to make one Hummer H3 2009.
How can I do this? With X-Tool ?
Thanks
Mozart dontknow

You can do this car with x-tool (by eeprom progranner) and digiprog also. You must do the dash first. Remove dash and find 93c56 chip. Then you have to do BSI of this car. Remove bsi and find 95040 chip.

I need Erase the eeprom or I can write over?
Thanks
Mozartthink
Quote this message in a reply
23-05-2015, 13:19 PM,
Post: #5
RE: Hummer H3 2009
(23-05-2015, 12:08 PM)mozart Wrote:  
(23-05-2015, 04:12 AM)mpitsaxis Wrote:  
(22-05-2015, 23:44 PM)mozart Wrote:  Hello
I need to make one Hummer H3 2009.
How can I do this? With X-Tool ?
Thanks
Mozart dontknow

You can do this car with x-tool (by eeprom progranner) and digiprog also. You must do the dash first. Remove dash and find 93c56 chip. Then you have to do BSI of this car. Remove bsi and find 95040 chip.

I need Erase the eeprom or I can write over?
Thanks
Mozartthink

You dont need to erase any chip. But its safer if you desolder chips from dash and bsi.
Quote this message in a reply
[+] 2 users say Thank You to Dash_Burner for this post
23-05-2015, 17:08 PM,
Post: #6
0LPG  RE: Hummer H3 2009
(23-05-2015, 13:19 PM)mpitsaxis Wrote:  
(23-05-2015, 12:08 PM)mozart Wrote:  
(23-05-2015, 04:12 AM)mpitsaxis Wrote:  
(22-05-2015, 23:44 PM)mozart Wrote:  Hello
I need to make one Hummer H3 2009.
How can I do this? With X-Tool ?
Thanks
Mozart dontknow

You can do this car with x-tool (by eeprom progranner) and digiprog also. You must do the dash first. Remove dash and find 93c56 chip. Then you have to do BSI of this car. Remove bsi and find 95040 chip.

I need Erase the eeprom or I can write over?
Thanks
Mozartthink

You dont need to erase any chip. But its safer if you desolder chips from dash and bsi.

Ok I will do this
Thanks mpitsaxis
Quote this message in a reply
23-05-2015, 23:00 PM,
Post: #7
0LPG  RE: Hummer H3 2009
(23-05-2015, 13:19 PM)mpitsaxis Wrote:  
(23-05-2015, 12:08 PM)mozart Wrote:  
(23-05-2015, 04:12 AM)mpitsaxis Wrote:  
(22-05-2015, 23:44 PM)mozart Wrote:  Hello
I need to make one Hummer H3 2009.
How can I do this? With X-Tool ?
Thanks
Mozart dontknow

You can do this car with x-tool (by eeprom progranner) and digiprog also. You must do the dash first. Remove dash and find 93c56 chip. Then you have to do BSI of this car. Remove bsi and find 95040 chip.

I need Erase the eeprom or I can write over?
Thanks
Mozartthink

You dont need to erase any chip. But its safer if you desolder chips from dash and bsi.

I will put more, now 20 I will put 120 so I think I need make only the dash and the BSI will update ? And after one week I will put 20 again
I hope the eeprom write two times.
It's only to pay less taxeswink
thanks
Quote this message in a reply
24-05-2015, 09:31 AM,
Post: #8
RE: Hummer H3 2009
Yes i think so, i would try only dash first..
Quote this message in a reply
[+] 2 users say Thank You to pietje001 for this post


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content