Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Motorcycles ISTA/P ignition problem.
13-06-2015, 11:38 AM,
(This post was last modified: 13-06-2015, 11:47 AM by epsodus.)
Post: #7
|
|||
|
|||
RE: BMW Motorcycles ISTA/P ignition problem.
Hi, have you on the Motorcicle a CanBus or Kline ? I have the same cable, is not work on Motorcicle with Kline. I have a new cable with the pinout from picture, this work on kline.
For Canbus i have a new Cable with electronic in the Case, is work on Kline and Canbus. Hi, sorry, ignition manually is not work and coms from Icom. Hi, here is a Cable from China. (09-06-2015, 12:59 PM)Czozen Wrote: Epsodus, OK, so i have to make jumper between PIN 1 and PIN 16 with switch, to turn on and off ignition manually? |