[bouizanne]

Hi friends
some one can give me help for repair my XS EVO (no full chip) I need the value of the missing capacitors on this pictures , Thanks

[carpi]

Hi friends
some one can give me help for repair my XS EVO (no full chip) I need the value of the missing capacitors on this pictures , Thanks

Only picture I can not de-soldering the parts to measure.
I think 100n

[bouizanne]

Hi , very thank for your answer carpi , i wait little one or two further notice , if nobody can help me i try 100nf

[carpi]

I made in-circuit measurements on board.
And thank for your thanks


Don't forget to introduce yourself
http://cartechnology.co.uk/showthread.php?tid=7

[bouizanne]

Thank very much my friend , no problem i make my introduce , i was need resubscribe after the crash of forum , i forgotten

[bouizanne]

Hi friends
i put in this rar picture of all coponents that i need value , thank by advance for your help

[titoun]

Hi,

All components that are missing on your interface, and that are replaced by capacitors on GOOD clone (by chineses); are not capacitors on ORIGINAL XS EVO .....!

Cdlt.

[bouizanne]

Hi,

All components that are missing on your interface, and that are replaced by capacitors on GOOD clone (by chineses); are not capacitors on ORIGINAL XS EVO .....!

Cdlt.

thank you titoun can you say me what's it is ? i would like rework my xs EVO
for this time i look i need change :
1 X varistors 10V 2kA 22000pF V18ZA40P
1 X Common Mode Filters / Chokes 400ohms 100MHz 50V ZJYS51R5-2P
1 X fixed inductors 22uH 5% NLV32T-220J-PF
4 X Optocoupler 10MBd2Ch 3mA HCPL-063N-000E
3 X Speed Optocouplers 1MBd 1Ch 16mA HCPL-0500-000E
1 X quarts 4.000
2 X resistance 473
7 X condensateur 30pf=0.030nf ?????????

can you help me for this friend , fantomel say me you know good this tool , if you want i have skype , have a good day for all