[hollow]

After having to do immo delete in ecu flash , immobiliser fault and engine management light are showing on dash .

no faults are shownin bsi ,just in edc15c2 engine ecu .permanent immobiliser fault when viewed with lexia .

any cure besides either another ecu coding in or a key ,bsi and ecu swap ?

also it has siemens bsi unit 95160 eeprom , can it be rea on board as its very close to other components that may get wiped out with heat .

[tjjautos]

Hi If you are using LIEXA go in to the engine ECU use live data it will tell you if the engine ECU is locked or unlocked if the immo is off it should say unlocked if it says locked then your immo off did not work

[eau13356]

After having to do immo delete in ecu flash , immobiliser fault and engine management light are showing on dash .

no faults are shownin bsi ,just in edc15c2 engine ecu .permanent immobiliser fault when viewed with lexia .

any cure besides either another ecu coding in or a key ,bsi and ecu swap ?

also it has siemens bsi unit 95160 eeprom , can it be rea on board as its very close to other components that may get wiped out with heat .

Use chipquik to remove the eeprom.

https://www.google.pt/search?hl=pt&q=chi...gws_rd=ssl