[lednicazar]

Also the software must be any special version?? I've updated from bmw site the media software bit in not sure if its other software in the module or check with ista-p for an update in that module

18-03 at least (btld 002-xxx-xxx)

That update could be also done with ESYS and the last PSdZData 4.39.30 full? Or should I search other particular file for the unit?

[Thorsten]

Realy?
For something what you can find if you would use the search function on this board?



Thorsten

[lednicazar]

Realy?
For something what you can find if you would use the search function on this board?



Thorsten

I've really several times without luck, or at least a good cuide to not brick anything or lost fsc or somthing.
Till now i was able to do all but not code anything because BTLD IS 00034AC_001_041_002, not the 002_xxx_xxx that the colleage @dasi told some post ago

I've psdzdata 4.39.30 full, is ir possible to update just the hu? I've read that you should search for dependencies to update all the modules affected


Update: I will try to follow two guides that i've found
See guides atached, one video in youtube and one on bimmerfest

[jb2005]

Realy?
For something what you can find if you would use the search function on this board?



Thorsten

I've really several times without luck, or at least a good cuide to not brick anything or lost fsc or somthing.
Till now i was able to do all but not code anything because BTLD IS 00034AC_001_041_002, not the 002_xxx_xxx that the colleage @dasi told some post ago

I've psdzdata 4.39.30 full, is ir possible to update just the hu? I've read that you should search for dependencies to update all the modules affected

Yes, you can update the headunit only without much trouble. It's a beginner's task.

[pSyl0]

One thing that should be taken into consideration is that TeleService is also using changed LONGVIN and in my case it changed workoshop to which service request are sent. I don't know how Remote Services behaves as I have reverted to original state.

[jb2005]

One thing that should be taken into consideration is that TeleService is also using changed LONGVIN and in my case it changed workoshop to which service request are sent. I don't know how Remote Services behaves as I have reverted to original state.

If unit is patched correctly instead of using fake provisioning from other cars, everything works correctly.

[pSyl0]

One thing that should be taken into consideration is that TeleService is also using changed LONGVIN and in my case it changed workoshop to which service request are sent. I don't know how Remote Services behaves as I have reverted to original state.

If unit is patched correctly instead of using fake provisioning from other cars, everything works correctly.

So it's possible to activate CarPlay without FSC?

[jb2005]

One thing that should be taken into consideration is that TeleService is also using changed LONGVIN and in my case it changed workoshop to which service request are sent. I don't know how Remote Services behaves as I have reverted to original state.

If unit is patched correctly instead of using fake provisioning from other cars, everything works correctly.

So it's possible to activate CarPlay without FSC?

Of course, if car has online ATM. Read the forums.

[dasi]

One thing that should be taken into consideration is that TeleService is also using changed LONGVIN and in my case it changed workoshop to which service request are sent. I don't know how Remote Services behaves as I have reverted to original state.

If unit is patched correctly instead of using fake provisioning from other cars, everything works correctly.

So it's possible to activate CarPlay without FSC?

3 ways - oem fsc, patched fsc, provisioning.

[pSyl0]

One thing that should be taken into consideration is that TeleService is also using changed LONGVIN and in my case it changed workoshop to which service request are sent. I don't know how Remote Services behaves as I have reverted to original state.

If unit is patched correctly instead of using fake provisioning from other cars, everything works correctly.

So it's possible to activate CarPlay without FSC?

3 ways - oem fsc, patched fsc, provisioning.

OK if I understand corectly provisioning can be done with method from first post in this topic or by xml file? If so can you tell me if it is possible to do like this:
  1.change LONGVIN to one with lets say CarPlay and RTTI (this two I don't have in my car)
  2. provision it using tool32 (first post's method)
  3. download provisioning xml from the HU using lesen_provisioning_data job
  4. revert LONGVIN to my original one
  5. provision it with same as in step 2
  6. upload xml to HU