Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

07-03-2017, 12:49 PM,
Post: #301
XZBMW  RE: FSTOOL
Hi - does anyone want to demonstrate their superiority and teamviewer in to my laptop to get this running properly please??
I'm not usually a total fool but obviously I am today! Java is installed in a correct dir, the .bat runs the java tests fine but i get the following message:
'Start FsTool using CarServer....
Unable to access jarfile FsTool.jar'

what haven't I put where?
if anyone can help me out I'll literally be eternally grateful!
thanks


Attached Files Thumbnail(s)
   
Quote this message in a reply
16-03-2017, 12:33 PM,
Post: #302
FSTOOL
(07-03-2017, 12:49 PM)labdaddy Wrote:  Hi - does anyone want to demonstrate their superiority and teamviewer in to my laptop to get this running properly please??
I'm not usually a total fool but obviously I am today! Java is installed in a correct dir, the .bat runs the java tests fine but i get the following message:
'Start FsTool using CarServer....
Unable to access jarfile FsTool.jar'

what haven't I put where?
if anyone can help me out I'll literally be eternally grateful!
thanks


Run CMD as admin. Often cause of not being able to access folders but I'm also not an FStool user, so this is speculation but worth a shot. Can't hurt. Also did you unblock all files before installing?


Btw what is FSTool designed for? What chassis and what can it do I was under the impression it's been supplanted by new versions because the java recommended or needed for this is like JRE 1.4 which is 15 years old and deprecated like a decade ago.


Sent from my iPhone using Tapatalk Pro

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
17-03-2017, 01:55 AM,
Post: #303
RE: FSTOOL
(28-02-2017, 19:04 PM)lked Wrote:  My Question is:

I have full repair pack from a CIC. That CIC was stolen then in case of an burglary. Now the owner bought a new CIC from eBay. Can I import the original FSCs/Certificates from the repair-pack to the new CIC and everything works? Or do I need new ones?

Yes. Change the CIC Vin and import full repair pack.
Quote this message in a reply
18-03-2017, 23:59 PM,
Post: #304
RE: FSTOOL
Anyone got FStool with active certificates? And maybe the sh file to usb which erases everyrhing in cic for input fsc?
Quote this message in a reply
19-03-2017, 13:39 PM,
Post: #305
FSTOOL
Erase old fsc you can do with fstool.
Contact darksys or MEN from other forum .
He have an solution for you.
He have certificates fit to your fsc set. He provide fsc set for all vehicle (vehicle that never had cic)


Gesendet von iPhone mit Tapatalk Pro
Quote this message in a reply
20-03-2017, 15:08 PM, (This post was last modified: 20-03-2017, 15:09 PM by intel123.)
Post: #306
RE: FSTOOL
(18-03-2017, 23:59 PM)Stivikivi Wrote:  Anyone got FStool with active certificates? And maybe the sh file to usb which erases everyrhing in cic for input fsc?

You wont get private (active) certificates with any FStool, you can forget about that one from the beginning so forget signing your own certs without patching CIC itself (v850 IOC firmware needs to be patched).

For virginizing CIC it is done quite simply,
1) if these files exists, remove them and make empty ones:
/mnt/hbdebug/data01
/mnt/hbdebug/data02
/mnt/hbdebug/data03

Code:
rm -rf /mnt/hbdebug/data0?
touch /mnt/hbdebug/data01
touch /mnt/hbdebug/data02
touch /mnt/hbdebug/data03

after that, you should clear generalPersistencyData_DiagnosticSWTController, you can find empty (virginized) one in attachment. File normally resides in: /mnt/HBpersistence/normal/

after that, reboot the CIC and its virginized.


Attached Files
generalPersistencyData_DiagnosticSWTController.zip
File Type: .zip
Downloaded: 236 times
Size: 402 bytes


[Image: 18.08.44-17.09.18.gif]
BlackBOX Sistemi, Automotive   
Reputation: +1 - paskuale [+1]
Visit this user's website
Quote this message in a reply
[+] 6 users say Thank You to intel123 for this post
21-03-2017, 11:58 AM,
Post: #307
RE: FSTOOL
(20-03-2017, 15:08 PM)intel123 Wrote:  
(18-03-2017, 23:59 PM)Stivikivi Wrote:  Anyone got FStool with active certificates? And maybe the sh file to usb which erases everyrhing in cic for input fsc?

You wont get private (active) certificates with any FStool, you can forget about that one from the beginning so forget signing your own certs without patching CIC itself (v850 IOC firmware needs to be patched).

For virginizing CIC it is done quite simply,
1) if these files exists, remove them and make empty ones:
/mnt/hbdebug/data01
/mnt/hbdebug/data02
/mnt/hbdebug/data03

Code:
rm -rf /mnt/hbdebug/data0?
touch /mnt/hbdebug/data01
touch /mnt/hbdebug/data02
touch /mnt/hbdebug/data03

after that, you should clear generalPersistencyData_DiagnosticSWTController, you can find empty (virginized) one in attachment. File normally resides in: /mnt/HBpersistence/normal/

after that, reboot the CIC and its virginized.

Hey

therefore I know an sh file to put to an usb stick, faq from bmwtools.info.

Virginizing cic is no problem, only the way to put fsc back in, that's the point.
Quote this message in a reply
21-03-2017, 12:02 PM,
Post: #308
RE: FSTOOL
(21-03-2017, 11:58 AM)Stivikivi Wrote:  Hey

therefore I know an sh file to put to an usb stick, faq from bmwtools.info.

Virginizing cic is no problem, only the way to put fsc back in, that's the point.

For you it is a problem to put fsc certs into virgin CIC fail

[Image: 18.08.44-17.09.18.gif]
BlackBOX Sistemi, Automotive   
Visit this user's website
Quote this message in a reply
28-03-2017, 20:02 PM,
Post: #309
RE: FSTOOL
Tried using FSTOOL to import FSC 17, 19 but when i try to import 1B always showing ERROR 7009. Can anyone help me with this. Ive changed my CIC VIN to the VIN from FSC's i have. But the CAS VIN is different. Previously i only had 17 enabled from factory, then i VO coded $609 added Navigation and Script activated the CIC. But the maps on CIC are EUROPE PREMIUM. I need to change to INDIA PREMIUM thats why i need to import FSC 1B AND 19 to update Maps to INDIA to get the 1B to generate FSC CODE. Can anyone help me??
Quote this message in a reply
28-03-2017, 21:59 PM,
Post: #310
FSTOOL
You don't need to change vin in cic.
Read 1B file from cic with vin (for Europe) and generate with this 1B file your Indian Fsc.


Gesendet von iPhone mit Tapatalk Pro
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Help FSTOOL[11049] CIC retrofit Rawediag 13 3,014 01-12-2023, 12:17 PM
Last Post: NeRkO20
XZBMW FSTool 2.0.2.1 without viruses LeonidLunin 15 2,714 13-07-2023, 10:23 AM
Last Post: NAVJunk
XZBMW E70 Certs, how to 'virginize' CIC or get FSTool working? Tawa 5 1,139 20-01-2022, 07:59 AM
Last Post: ccfj1
  FSTool Import Issues - 6F and 9C Only mxchris727 5 1,227 01-10-2019, 00:11 AM
Last Post: codemybmw
XZBMW Help with CIC patch, fstool duss46 2 851 09-09-2019, 21:32 PM
Last Post: duss46
  fstool any help how to use and connect !!??? rana 0 407 07-06-2019, 07:26 AM
Last Post: rana
XZBMW HELP INSTALL FSTOOL atalay 3 912 23-04-2019, 20:32 PM
Last Post: ____ANGEL___
XZBMW Problems with insert fscs with fstool atalay 7 1,393 14-04-2019, 10:17 AM
Last Post: atalay
XZBMW FSTool Error spk1338 2 1,251 02-02-2019, 01:37 AM
Last Post: flacoramos
XZBMW FSTOOL installation problem yzc729 14 8,565 11-10-2018, 09:24 AM
Last Post: Sanyi85

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content