[gi61]

Hi friends ,

I?ve problem with glow of this Ford Focus C MAX 1.6 tdci 90 Hp MY 2008 , with P0380 stored on memory , but if I erase it with Da Vinci sw , car is always in limp mode and on the dash ther's an advice " check engine control"  .

Could some one help me to solve this situation ?

Thanks in advance .

C-Max-1.6 TDCi-382741-382741.rar
File Type:
Downloaded:	4 times
Size:	42.35 KB

[zilvinas1112]

Hi,
Try to do DPF resets. Maybe it's not a glow plugs.
Regards.

[Turbinkaelek]

p0380 I ended up replacing the glow plug controller. But along the way, it turned out that there is one more reason (most likely to damage the controller itself), namely the contacts of one or two glow plugs touched the aluminum heat shield of the engine. As a result, the flowing current exceeded the permissible level and the controller stopped heating just after starting.

[zilvinas1112]

Try and report.
I think this file will fix it your glow plug blinking light. 
Pass after +Rep and Thanks.
Good day.
Regards.

[gi61]

Try and report.
I think this file will fix it your glow plug blinking light. 
Pass after +Rep and Thanks.
Good day.
Regards.

Hi , 

Thanks and reputation was given ........