Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Scanmatik 2 pro with ISTA/P
13-02-2023, 10:28 AM,
Post: #1
|
|||
|
|||
Scanmatik 2 pro with ISTA/P
Hello all,
Has anyone experience with Scanmatik 2 pro together with OFFICIAL ISTA/P downloaded from AOS? When I try to create a new session, I get an error that no server can be found. When using ISTA/D everything works fine. Thanks |
|||
14-02-2023, 02:44 AM,
Post: #2
|
|||
|
|||
RE: Scanmatik 2 pro with ISTA/P
Before starting ISTA/P session - run C:\Program Files (x86)\BMW AG\PassThruD\IfhSrv32 and that should solve your problem.
|
|||
14-02-2023, 07:55 AM,
Post: #3
|
|||
|
|||
RE: Scanmatik 2 pro with ISTA/P
|
|||
14-02-2023, 20:58 PM,
Post: #4
|
|||
|
|||
RE: Scanmatik 2 pro with ISTA/P
Your solution did not help unfortunately. I was able to bypass the error by using an Ethernet cable. The screen after that it searches for a device by showing the IP address. I guess this can only be done using an ICOM, because the scanmatik doesn't support this feature.
|
|||
15-02-2023, 18:35 PM,
(This post was last modified: 15-02-2023, 18:37 PM by micarrole.)
Post: #5
|
|||
|
|||
RE: Scanmatik 2 pro with ISTA/P
The problem solved myself.
If you want using J2534 device, following this steps. 1. Run BMW PassthruD in Administrator(Important!!!) 2. Choose the J2534 device you want and save it 3. Open your file explorer 4. Move to C:\EDIABAS\BIN (default) 5.Open EDIABAS.INI in notepad 6. Edit configuration interface = STD: passthruD (default STD:OBD maybe..) and save it! 7. Launch ISTA/D and move to Configuration -> Interface 8. Select EDIABAS.INI and apply it. Do not select "Passthru" 9. That's all. Enjoy |