[phara0n]

Ok , car came to me with a problem over steering angle , i've did everything online, and always same thing ... so i've wrongly flashed with 144T ... now i've those msg and can't flash again can someone help please?
by the way i've got no vehicle speed problem before flashing ... can someone bypass this pre-requestics for flashing !!

[phara0n]

if anyone could help ..

[Rickhunter81]

may you can flash with another tool, Like advi or vcp.

[phara0n]

may you can flash with another tool, Like advi or vcp.

all tools have same prerequisite ... VEHICULE SPEED need to be = 0 KM/h ... and in the diag with this EPS the VHSPD is = 50km/s it like car is in driving mode !!! so cna't flash, have to bypass this is some one can decompile the ODX file of the flash and bypass this condition !!

[regensensor]

VHS PD is = 50km/s
what do you mean by VHS PD?
50KM/s strange value
can you find the value in a reading block?
what is in the measured value block in the MSG and dashboard?

[phara0n]

VHS PD is = 50km/s
what do you mean by VHS PD?
50KM/s strange value
can you find the value in a reading block?
what is in the measured value block in the MSG and dashboard?

VHSPD, i mean Vehicule Speed ... all other ecu are 0KM !! its is because with that flash its the EPS is not communication to other module ! so it read 50km/h as default value

[regensensor]

Did you carry out online parameterization and coding after flashing?

Google Translator

[TomSab]

I have same problem after flash ACC on the Audi A6 4G.ACC death! Use IDEX very good tool to flash and parametrization when odis e no posible !

[Tekero]

You need to flash BOOT file before flash correct one.

[yasindnr]

You need to flash BOOT file before flash correct one.

were you able to find the boot items?