[massilos]

Hi everyone, I'm having hard time finding this IMMO code 39 digits code. to Reprogram the keys, my friend has saved the Renault_Dfkash.bin file before Virginizing the bcm after that we asked immo code 39 digit code we extracted the  pin code but not working. can we extract the  immo code from the saved bin file ? I attached the bin file. Cheers

[diagservhaag]

Do you have more information? Which model and year? BCM/UCH type and P/N?

In my experience Autel is good in obtaining the pin by reading the DFlash. But the procedure for programming when using the incode/outcode system where you need to contact Renault has never worked for me... It gives an incorrect outcode.
I haven't tried it on a 39-digit system yet though...

Tomorrow at work I will see what PIN I can get from your dump.

[massilos]

Do you have more information? Which model and year? BCM/UCH type and P/N?

In my experience Autel is good in obtaining the pin by reading the DFlash. But the procedure for programming when using the incode/outcode system where you need to contact Renault has never worked for me... It gives an incorrect outcode.
I haven't tried it on a 39-digit system yet though...

Tomorrow at work I will see what PIN I can get from your dump.

Renault trafic III 1.6 Diesel 2015-BCM 284B12763R  vin VF14FL00253656873


Hi Mate, I appreciate very much your reply  the device that it gets is OBD link sx with Renolink, but  renolink never worded using v2.05 . The device I use most is Can clip 2.14 also I get USB token keys from dacia renault.net . The Autel  device is not myn  is someone I hired to reprogram the keys, then he wiped out the UCH blank and left ne in sh*** I had to pay him for his time. he managed to back up  the Renault_DFlash.bin ,i dont know if is usefull after he left ,I managed to reprogram the UCH with a can clip using renault.net keys token, but  the keys are not linked anymore to the van .so keys are useless for now.  any time i try to reprogram the keys with can clip .can clup general programin code and ask for pin code .witch i dont have i dont know how to generated.Tif you need any author information please let me know thank you for your help

[lupu_sandu]

Your pin is 32digits long. There is no other PIN except that.
However, the 39 digits code (not pin) that Autel ask is calculated by dealer from Renault NET.

[massilos]

Your pin is 32digits long. There is no other PIN except that.
However, the 39 digits code (not pin) that Autel ask is calculated by dealer from Renault NET.

Morning Lupu_sandu Thank you for taking your time. i appreciate it very much. I'm so excited to give it a try today. Should i use the pin with Autel or can clip .  I will try with can clip cause that what I have at the moment if it donts work  I will call the person again to come back with Autel. Another question is this pin related to the keys or to the bcm  , for instence we have an issue with the dcm and we  decidede to replaced , should we use the same pin code or we have to generate another pin code thank you again I appreciate a very much for your help I will keep you posted with that today  

[massilos]

Hi Lupu_sandu I try the code unfortunately it didnt work The keys apparently the still linked to the vehicle but it does not start it does not open or close the doors the UCH is blank. I tried to program the uch using can clip v 214. It is keep asking me for mobilizer code.

---

any idea suggestion or alternatif are always welcome

[mkii]

47C75........................ is not pin this is signature of lupusandu !!!

[flavio69]

Hi Lupu_sandu I try the code unfortunately it didnt work The keys apparently the still linked to the vehicle but it does not start it does not open or close the doors the UCH is blank. I tried to program the uch using can clip v 214. It is keep asking me for mobilizer code.

---

any idea suggestion or alternatif are always welcome

You have everything you need...including token,wich is the holly graal...
in your first picture is a code generated by clip+vin code (enter in code management),can provide immo code...that's "offline""procedure,but if you have token,is much more easier because it's automatically accepted.
But in other prinstscreenI saw ""DONGE-NOT ALLOCATED""and my suspicion is that is your problem,you might have this Dongle df.code present.

[massilos]

Good morning. All first of all, I like to think everyone who's been involved in this post highly appreciates your input. Honestly, I have been struggling since October last year. The engine is ben changed in this vehicle. The Mechanic managed to burn the starter with ECU left me in shi***t toked somewhere else was in november then that mecanc was seek i toked back last month in the same condition, i have it in my yard
Should I get the ecu kit bcm dash and the keys ? or is it possible to fix it in this condition. 
i use the can clip 214  i am not able to get the (spare code) i can use older virsion if it will make diference,
also i get spare bcm that i get on ebay for spare if this can help.
i dont know me be desable the immobilise in the ecu,
I am willing to try any idea or advice i can do teamviewe . Ether to change the full kit or fixed as is. Thank you  

---

at the moment i get can clip and obdlink ex /mx and RenaultPinExtractor 2 this is the tools i get .
if you can direct me to procedure i can follow i am available any time

[mkii]

I may be talking nonsense but ....
renolink does not make trafic3 cards ???