Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bench reading ISN CAS 3 BMW explorer?
|
10-03-2023, 15:43 PM,
Post: #1
|
|||
|
|||
Bench reading ISN CAS 3 BMW explorer?
Hey guys, so I connected the bmw explorer with my bench cable. Can High/Low, Ground, 12V.
Now I want to read the isn, therefore it has to be update with bmw explorer. Problem is: Which pin is ignition detect/kl15? Bmw explorer says I have to turn off the ignition, how can I do this but simultaneously give the cas 12V ? Without ignition 12V. I have a godiag cable, so I can simulate ignition, but I don't know which pin. I have Pinout |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
10-03-2023, 15:47 PM,
Post: #2
|
|||
|
|||
|
RE: Bench reading ISN CAS 3 BMW explorer?
15WUP is PIN19 if thats what u mean
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
|
|
10-03-2023, 15:47 PM,
Post: #3
|
|||
|
|||
|
RE: Bench reading ISN CAS 3 BMW explorer?
Get a ignition switch with key slot.. and plug to cas
|
|||
|
|
|
16-03-2023, 19:28 PM,
(This post was last modified: 16-03-2023, 19:49 PM by xMoses.)
Post: #4
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
(10-03-2023, 15:47 PM)jaramillo Wrote: Get a ignition switch with key slot.. and plug to cas Just connected one, but which pin do I have to supply 12v to get the key soaked in? For now I have 12 ground 35 can low 26 can high 34 12v Ignition coil 1->1 2->2 And so on, also tried 12v on pin 1 but key won't get soaked in |
|||
|
|
|
17-03-2023, 06:54 AM,
Post: #5
|
|||
|
|||
|
RE: Bench reading ISN CAS 3 BMW explorer?
BMW explorer always displays the warning that ignition must be switched off. If you have a bench setup, why not just see if it works with an old / unused CAS? These are very cheap.
|
|||
|
|
|
17-03-2023, 07:27 AM,
Post: #6
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
(17-03-2023, 06:54 AM)user0086 Wrote: BMW explorer always displays the warning that ignition must be switched off. If you have a bench setup, why not just see if it works with an old / unused CAS? These are very cheap. The case I've got is am old one that I can use, but if I press update it tells update fail turn off the car for 4 minutes etc. No matter what I do |
|||
|
|
|
17-03-2023, 12:16 PM,
Post: #7
|
|||
|
|||
|
RE: Bench reading ISN CAS 3 BMW explorer?
I have tried connecting explorer to cas according to diagram but it never worked!! So I made a small bench setup with JBBF and that works. Invest in that and be happy
|
|||
|
|
|
18-03-2023, 17:07 PM,
Post: #8
|
|||
|
|||
RE: Bench reading ISN CAS 3 BMW explorer?
(17-03-2023, 12:16 PM)willisodhiambo Wrote: I have tried connecting explorer to cas according to diagram but it never worked!! So I made a small bench setup with JBBF and that works. Invest in that and be happy I've got it working and it shows me the cas and I can code etc. But I can't program it with bmw explorer Something is missing for the cas |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| MGU Bench connection | kimz | 4 | 477 |
22-04-2024, 17:06 PM Last Post: kimz |
|
| Test bench Connection to CAN ECU's | HaakonA | 3 | 313 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
|
|
Tool for bench read 8hp | Garryq | 9 | 1,679 |
26-03-2024, 09:32 AM Last Post: skywoker |
| Bosch MEVD172H bench backup | mrproper | 1 | 281 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
|
|
ENAV2 bench activation | Airbus | 10 | 967 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
|
ISTA CONNEXION AFTER READING VIN | ipcsr76 | 2 | 255 |
13-02-2024, 16:53 PM Last Post: Sedoy |
| Motronic 3.3.1 bench | jaramillo | 3 | 217 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
| Dde Coding/flash with esys in bench? | ruben_17non | 0 | 209 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
| Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 569 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
|
|
NBT display on bench without unit | djordan | 4 | 370 |
15-01-2024, 08:08 AM Last Post: Powerlab |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
