Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CAS 3 bench with ignition coil
|
16-03-2023, 19:52 PM,
Post: #1
|
|||
|
|||
|
CAS 3 bench with ignition coil
Ive got a case from e81 on bench to test.
For now I have 12 ground 35 can low 26 can high 34 12v Ignition coil 1->1 2->2 And so on, also tried 12v on pin 1 but key won't get soaked in Trying to simulate ignition on/off for bmw explorer CAS update on bench. Does anyone know how to do it? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
16-03-2023, 22:48 PM,
Post: #2
|
|||
|
|||
|
RE: CAS 3 bench with ignition coil
My recomendation is to get a key slot + start/stop button, simple, cheap and easy way
|
|||
|
|
|
16-03-2023, 23:52 PM,
Post: #3
|
|||
|
|||
|
RE: CAS 3 bench with ignition coil
My test bench just consists of power, ground, can-h, can-l straight to the CAS. I also have a key slot and start button. If you want to get very fancy, you may need a JBBFE since OBD communicates through that.
|
|||
|
|
|
17-03-2023, 07:28 AM,
(This post was last modified: 17-03-2023, 07:35 AM by xMoses.)
Post: #4
|
|||
|
|||
RE: CAS 3 bench with ignition coil
(16-03-2023, 23:52 PM)RocketSurgeon Wrote: My test bench just consists of power, ground, can-h, can-l straight to the CAS. I also have a key slot and start button. If you want to get very fancy, you may need a JBBFE since OBD communicates through that. How do you get the key soaked in? I've connected it like you but without start button (16-03-2023, 23:52 PM)RocketSurgeon Wrote: My test bench just consists of power, ground, can-h, can-l straight to the CAS. I also have a key slot and start button. If you want to get very fancy, you may need a JBBFE since OBD communicates through that. 34 is 12 v 26 is can low 35 is can high 12 is ground 4/5 Is that how you connect? 1-1 2-2 3-3 and so in on the ignition? |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| MGU Bench connection | kimz | 4 | 472 |
22-04-2024, 17:06 PM Last Post: kimz |
|
| Test bench Connection to CAN ECU's | HaakonA | 3 | 313 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
|
Tool for bench read 8hp | Garryq | 9 | 1,675 |
26-03-2024, 09:32 AM Last Post: skywoker |
| Bosch MEVD172H bench backup | mrproper | 1 | 280 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
| 2006 BMW X5 E53 Converted to coil springs-Need to delete "self leveling warning | koziol | 11 | 1,239 |
22-03-2024, 14:22 PM Last Post: Gabriel87 |
|
|
|
ENAV2 bench activation | Airbus | 10 | 962 |
25-02-2024, 08:17 AM Last Post: jb2005 |
| Motronic 3.3.1 bench | jaramillo | 3 | 215 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
| Dde Coding/flash with esys in bench? | ruben_17non | 0 | 206 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
| Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 566 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
|
|
NBT display on bench without unit | djordan | 4 | 368 |
15-01-2024, 08:08 AM Last Post: Powerlab |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
