[patrykv98]

Hi!

I have locked ecu Med17.5.25. 
Ecu has been locked with failed writing with KTM bench.

Before this someone make full bakcup with KTM (eprom, flash + password). 

I have Autotuner master. In boot mode AT identifies the ECU, but can't read it because there is an error trying to read the password.

But i have the password from in backup from KTM.

Is it possible to prepare a backup file for the autotuner and bring this ECU back to life?

Backup from KTM in attachment.

Regards!

backup.rar
File Type:
Downloaded:	9 times
Size:	1.15 MB

[ecutech123]

Hi!

I have locked ecu Med17.5.25. 
Ecu has been locked with failed writing with KTM bench.

Before this someone make full bakcup with KTM (eprom, flash + password). 

I have Autotuner master. In boot mode AT identifies the ECU, but can't read it because there is an error trying to read the password.

But i have the password from in backup from KTM.

Is it possible to prepare a backup file for the autotuner and bring this ECU back to life?

Backup from KTM in attachment.

Regards!

Hello but if you have the previous reading when the ecu worked done with KTM 200 ( File Full + Micro + E2p + Password ) it would be enough to connect to the bench and do the correct procedure to unlock the ecu and bring it back to life with the same KTM 200 tool which is been used for the first reading when the ecu was still alive. Greetings.

[patrykv98]

It doesn't work with ktm...

[ecutech123]

It doesn't work with ktm...

If you have the reading done with KTM 200 complete with Full + Micro + EEprom + Password file before the ecu blocked at 100% I assure you that it is possible to restore with KTM 200 except if your instrument is broken. Greetings.

[patrykv98]

It was KTM bench not KTM 200 and it doesn't work.

[ecutech123]

It was KTM bench not KTM 200 and it doesn't work.

Ah ok I thought it was KTM 200 since you wrote KTM I didn't get it right. If you have Trasdata Dimension Sport or K-Tag or KessV3 enabled to work also in Bench and Boot I can help you.

[patrykv98]

I have Autotuner master. It works in Boot with this ECU. AT identifies ECU, but can't read password. Maybe it is possible to make a Autotuner bacup file and recover the ECU?

[Stig33]

I have Autotuner master. It works in Boot with this ECU. AT identifies ECU, but can't read password. Maybe it is possible to make a Autotuner bacup file and recover the ECU?

Try upload this file with Autotuner in bench mode, if not working, try in boot mode.

Send report....

[patrykv98]

I have Autotuner master. It works in Boot with this ECU. AT identifies ECU, but can't read password. Maybe it is possible to make a Autotuner bacup file and recover the ECU?

Try upload this file with Autotuner in bench mode, if not working, try in boot mode.

Send report....

Still the same, AT cant't read the password in BOOT mode. I conntact also with the AT support and they told me if the ecu was bricked with antoher tool they can't help.