Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Audi S4 B8 Driver seat memory problem - Help!
27-03-2023, 19:45 PM,
Post: #1
|
|||
|
|||
Audi S4 B8 Driver seat memory problem - Help!
Hi
I have a problem with the memory of the steering seat. after updating the firmware via ODIS E, the driver stopped working properly I transferred the coding from the old driver via VCDS encoding accepted but no result how to fix it? Address 36: Driver's seat memory (J136) Label file:. 8T0-959-760.clb Part number SW: 8K0 959 760 D HW: 8K0 959 760 D Component: MEM-FS H06 0077 Verification: AA000000 Serial number: 00001001292709 Coding: 00581B00000000000000 Service code: WSC 00046 123 12345 VCID: 3B7582EBBA65A95597-806E 4 - number of errors found. Here they are: 03330 - Seat longitudinal adjustment motor 005 - Missing or incorrect basic settings / adaptation Freeze Frame: Error status: 01100101 Error Priority: 4 Error rate: 1 Internal error counter: 127 Time indicator: 0 Date: 2023.03.27 Time: 20:15:54 03331 - Seat back adjustment motor 005 - Missing or incorrect basic settings / adaptation Freeze Frame: Error status: 01100101 Error Priority: 4 Error rate: 1 Internal error counter: 127 Time indicator: 0 Date: 2023.03.27 Time: 20:15:54 03332 - Seat height adjustment motor 005 - Missing or incorrect basic settings / adaptation Freeze Frame: Error status: 01100101 Error Priority: 4 Error rate: 1 Internal error counter: 127 Time indicator: 0 Date: 2023.03.27 Time: 20:15:54 03333 - Seat tilt motor 005 - Missing or incorrect basic settings / adaptation Freeze Frame: Error status: 01100101 Error Priority: 4 Error rate: 1 Internal error counter: 127 Time indicator: 0 Date: 2023.03.27 Time: 20:15:54 like my post and the content i share, give me a +1 recommendation and a thanks = +
|
|||
28-03-2023, 05:24 AM,
Post: #2
|
|||
|
|||
RE: Audi S4 B8 Driver seat memory problem - Help!
Hello, I haven't done this procedure with seats myself yet, but it looks like you need to perform an adaptation (initialization) for seat motors - so the system knows the end points of travel.
Basically, to reach the MAX/MIN position in each direction of travel, so these values are memorized again. It is either a command inside VCDS adaptation menu for this module, or is performed manually by moving seat to each direction of travel and holding the button for a few seconds. Window motor regulators also often require initialization after flashing a corresponding control unit. |
|||
Reputation: +1 - CenturionM [+1] | |||
28-03-2023, 05:34 AM,
Post: #3
|
|||
|
|||
RE: Audi S4 B8 Driver seat memory problem - Help!
Start up Odis S and make diagnostic with guided errorsearch (GFF). Odis S will find itself the solution and move the seats in every direction, or it guides you to do it. pupu144‘s answer is right.
If my answer helped to fix anything, then don't forget to give me some rep please!
|
|||
Reputation: +1 - CenturionM [+1] | |||
28-03-2023, 10:35 AM,
Post: #4
|
|||
|
|||
RE: Audi S4 B8 Driver seat memory problem - Help!
coding done thx
like my post and the content i share, give me a +1 recommendation and a thanks = +
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content