[bluesky]

Hello.Everybody.


I tried to make a spare key of  MX-5 with 2007 years.

I copied immobilizer chip with VVDI super chip and I tried to programming a remote key.

I tried as in video


but not answer back after close door and open 3times.

after that I pushed the button, but there was no response.

I tried 3 or 4 times but no response same as first.

After that, I gave up because it didn't go into registration mode, but the remote control of the original key didn't work.

I check door switch and fuses but no problem.

I  thought I programmed it in the wrong way so I tried to other mx-5 of same model and the other car got the answer back and succeed.

Do yo have any ideas for solving to programming a remote?

Thank you so much.

[raffy haddad]

Did you check the ign lock when key in and door open have a beep sound
I had same situation once and it turned that ign not closing enough

[bluesky]

Did you check the ign lock when key in and door open have a beep sound
I had same situation once and it turned that ign not closing enough

Thank you for reply. I checked all of door sensor are not problem.
it has a beep sound when key in to ign. 
you mean is not close door enough ?