Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DME question MEVD1726 to MEVD172
13-04-2023, 03:01 AM,
Post: #1
|
|||
|
|||
DME question MEVD1726 to MEVD172
Hello all,
Need help with a simple question. X5 2012 N55 original Mevd1726 Its possible to clone 1:1 the ecu to MEVD172? Im not an expert in terms on those variants. Thanks in advance |
|||
13-04-2023, 04:20 AM,
Post: #2
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
I don’t think so, the high pressure is different.
Even they look a lil bit non-similar If u want to test, match ISN and reset WH, then flash with Esys, don't clone. It will most likely fail, but try. At least when u try to clone it, u will need boot to recover it, but flashing can always be recovered easily. All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
Reputation: +1 - jaramillo [+1] | |||
13-04-2023, 04:48 AM,
Post: #3
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
Thanks Mwahab for your help.
Last question, Car is E70, its possible to pick a F series ECU, or there is a difference in terms of HW? to clone I dont want to invest time on this, because supplier send me wrong pn mevd172 instead mevd1726 Thanks again |
|||
13-04-2023, 06:11 AM,
Post: #4
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
E70 has PT-CAN and Fseries have Flexray. For this is different hardware. It will not work even if You clone 1:1.
|
|||
Reputation: +1 - jaramillo [+1] | |||
13-04-2023, 07:48 AM,
Post: #5
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
(13-04-2023, 06:11 AM)Hoborg Wrote: E70 has PT-CAN and Fseries have Flexray. For this is different hardware. It will not work even if You clone 1:1. This is not quite true!! They share same hardware but different software. Clone works 100% if hardware is compatible. Programming will not because of different bootloader Share bosch number and i can check compatibility. OR LOOK HERE weboctopusdotin under bosc ecu databse and be happy (note the "dot") |
|||
Reputation: +1 - jaramillo [+1] | |||
13-04-2023, 09:19 AM,
Post: #6
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
Omg! I am sorry, i saw it as X3 not X5 .. sorry
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
13-04-2023, 14:17 PM,
Post: #7
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
@Jaramillo, do you have the N55 MEV172 E series? I need the dumps!! I have an E70 in which a MEVD1726 was installed and I have fuel pump issues I think because of the ECU. I have MEVD172 but from and F series. Need E series dumps if you have it
|
|||
13-04-2023, 14:25 PM,
Post: #8
|
|||
|
|||
RE: DME question MEVD1726 to MEVD172
(13-04-2023, 14:17 PM)willisodhiambo Wrote: @Jaramillo, do you have the N55 MEV172 E series? I need the dumps!! I have an E70 in which a MEVD1726 was installed and I have fuel pump issues I think because of the ECU. I have MEVD172 but from and F series. Need E series dumps if you have it Hello, Sure use this, USA version 335 E90 |