[sangria]

Hello,

I have a g30 LCI that the driver side headlight replaced. The headlight flashed with the same SW and VO coded. It is working but getting an error. The error is FLE_L Daytime Running Light/Position Light  Voltage outside of tolerance range.

I tried to find the value of DRL voltage High and Low but couldnt pin point on CAFD. I played with several High/Low voltage values and then Low beam gave the same error but it is corrected after values back to normal. 

So i am trying to understand if the problem is the coding or the headlight itself?

If coding is the issue then how all other values on low/high beams are correct just the DRL is having issue? I mean i have seen the issue on F series and it was the module on the headlight being older or newer causing the issue and it was getting corrected by the correct year of VO coding. 

I have tried couple different years and options but no luck. What could be the issue? Thank you!

[img=500x200]
[/img]