Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

e36 dme only no ews and key
12-05-2023, 11:16 AM,
Post: #1
XZBMW  e36 dme only no ews and key
Hi to all. Costumer brought dme for E36 without ews module and key. Is ews delete possible for dme? engine is M43. DME picture attached.


Attached Files
dme.rar
File Type: .rar
Downloaded: 5 times
Size: 997.57 KB

Quote this message in a reply
12-05-2023, 11:23 AM,
Post: #2
RE: e36 dme only no ews and key
I don't really have information about EWS-off in this case but EWS emulator is simple and reliable.

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply
12-05-2023, 11:37 AM,
Post: #3
RE: e36 dme only no ews and key
(12-05-2023, 11:23 AM)Vojno Wrote:  I don't really have information about EWS-off in this case but EWS emulator is simple and reliable.

I tried but no luck. I don't if I did the right thing but I followed the procedure.
Quote this message in a reply
12-05-2023, 11:48 AM,
Post: #4
RE: e36 dme only no ews and key
(12-05-2023, 11:37 AM)arthur101 Wrote:  
(12-05-2023, 11:23 AM)Vojno Wrote:  I don't really have information about EWS-off in this case but EWS emulator is simple and reliable.

I tried but no luck. I don't if I did the right thing but I followed the procedure.

what emulator did you try?

picture?

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply
12-05-2023, 11:49 AM,
Post: #5
RE: e36 dme only no ews and key
Tell us step by step how did you setup emulator.
Quote this message in a reply
12-05-2023, 12:05 PM, (This post was last modified: 12-05-2023, 12:27 PM by arthur101.)
Post: #6
RE: e36 dme only no ews and key
(12-05-2023, 11:48 AM)Vojno Wrote:  
(12-05-2023, 11:37 AM)arthur101 Wrote:  
(12-05-2023, 11:23 AM)Vojno Wrote:  I don't really have information about EWS-off in this case but EWS emulator is simple and reliable.

I tried but no luck. I don't if I did the right thing but I followed the procedure.

what emulator did you try?

picturea?

(12-05-2023, 11:49 AM)Rudkinp Wrote:  Tell us step by step how did you setup emulator.

Item includes instruction.

(12-05-2023, 11:48 AM) Vojno Wrote:  
(12-05-2023, 11:37 AM)arthur101 Wrote:  
(12-05-2023, 11:23 AM)Vojno Wrote:  I don't really have information about EWS-off in this case but EWS emulator is simple and reliable.

I tried but no luck. I don't if I did the right thing but I followed the procedure.

what emulator did you try?

picturea?


Attached Files Thumbnail(s)
       
Quote this message in a reply
12-05-2023, 13:53 PM,
Post: #7
RE: e36 dme only no ews and key
(12-05-2023, 12:05 PM)arthur101 Wrote:  
(12-05-2023, 11:48 AM)Vojno Wrote:  
(12-05-2023, 11:37 AM)arthur101 Wrote:  
(12-05-2023, 11:23 AM)Vojno Wrote:  I don't really have information about EWS-off in this case but EWS emulator is simple and reliable.

I tried but no luck. I don't if I did the right thing but I followed the procedure.

what emulator did you try?

picture?

(12-05-2023, 11:49 AM)Rudkinp Wrote:  Tell us step by step how did you setup emulator.

Item includes instruction.
Symle:
When the down right the two soldering points (as you can see in the picture) can you the ISN write in the emulator! use normal K line interface to connect to the emu "bus" line!
- writing mode
The ISN can you read it with INPA w/o problem!  wink  before
After you write ISN int the emu you must remove the "jumper soldering"!
- Now the emu is in working mode!
Connect the emu "bus" line to the BMS46 pin33

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply
12-05-2023, 14:25 PM,
Post: #8
RE: e36 dme only no ews and key
wouldnt it be easier to use EWSSync.exe for EWSII vehicles?


Quote this message in a reply
12-05-2023, 23:21 PM,
Post: #9
RE: e36 dme only no ews and key
Yes, but no, this emu not from factory! wink

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content