Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Tech2 clone
08-06-2015, 11:16 AM,
Post: #1
|
|||
|
|||
Tech2 clone
Why will my tech2 only work with supplied gm 32mb card
|
|||
08-08-2015, 12:14 PM,
Post: #2
|
|||
|
|||
RE: Tech2 clone
It should work with a proper card loaded with correct software. You gave very limited details, we cannot guess what you are doing there.
|
|||
09-08-2015, 17:48 PM,
Post: #3
|
|||
|
|||
RE: Tech2 clone
You can use any 32mb card with saab opel isuzu suzuki etc chinese cards are ok mostly i use 1 genuine card and three chinese cards without problems
clones can only have 1 card in the slot and most clones don't have shift button working so only front slot works also i have seen a few clone units die after being used for activation of some sensors ! |
|||
09-08-2015, 20:14 PM,
Post: #4
|
|||
|
|||
RE: Tech2 clone
Good info; i need a few new cards i have gen tech 2, so can i run two card in my tech 2 unit say vauxhall and saab.
thanks jon |
|||
15-08-2015, 12:34 PM,
Post: #5
|
|||
|
|||
RE: Tech2 clone
YES switch the slots using enter and shift key to swap the card slot priority
|
|||
18-08-2015, 18:17 PM,
Post: #6
|
|||
|
|||
RE: Tech2 clone
Learn some thing new every day lol only had mine 4-5 years now.
|
|||
26-08-2015, 10:11 AM,
Post: #7
|
|||
|
|||
RE: Tech2 clone
Also when buying cards make sure they are linear cards and not just compact flash ata has these dont work only linear cards work
if my post helps please give Reputation and Thanks
|
|||
28-10-2015, 23:47 PM,
Post: #8
|
|||
|
|||
RE: Tech2 clone
(15-08-2015, 12:34 PM)racin-snake Wrote: YES switch the slots using enter and shift key to swap the card slot priorityEven tech2 manual said use only top slot otherwise will not working properly. http://ukr-truck.com.ua/uploads/tech_2_users_guide.pdf |
|||
27-02-2016, 00:42 AM,
Post: #9
|
|||
|
|||
RE: Tech2 clone
(28-10-2015, 23:47 PM)drovid Wrote:(15-08-2015, 12:34 PM)racin-snake Wrote: YES switch the slots using enter and shift key to swap the card slot priorityEven tech2 manual said use only top slot otherwise will not working properly. 4 years i have had 2 cards Saab and Vauxhall/Opel cards in my unit saves having to carry them separate and maybe damage the spare never had a single problem with switching cards as it only prioritises the slot . |
|||
04-05-2016, 12:41 PM,
Post: #10
|
|||
|
|||
RE: Tech2 clone
Will only work with supplied card tried known working cards but comes up with candi not connected tried new vci still the same
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content