Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
No Feedback Given PCR2.1 - stage 1 dpf off
13-06-2023, 00:08 AM,
Post: #11
|
|||
|
|||
RE: PCR2.1 - stage 1 dpf off
Maybe this will help.
Adaptation of Carbon Mass (after DPF Replacement) Prerequisites: Ignition ON Engine OFF [Security Access -16] Enter the code shown in the VCDS pop-up balloon for "Adaptation Enabling" [Do It!] [Adaptation - 10] From the pulldown menu, select the entry for "Carbon Mass (DPF Replacement)" or "[*IDE00275*] Particle filter initialization". If those channels are not available look for [*IDE07903*] Adaptation of ash mass. Save a new value of 1 to reset the learned Carbon Mass. It's normal for that value to automatically change to 0 after it has been successfully saved. Check and clear fault codes to make sure none are present. |
|||
Reputation: +1 - blackTDI [+1] | |||
13-06-2023, 07:06 AM,
Post: #12
|
|||
|
|||
RE: PCR2.1 - stage 1 dpf off
update to newer sw version with odis, then on this version make resets, make new dpfoff
Fileservice Dyno Tested: Stage 1,2,3 , Manual: DPF off, EGR off, AdBlue
https://www.tuning-makarska.com/ We offer free slave tools ! Official Magicmotorsport Distributor Official Autotuner Distributor Official Alientech Distributor DAMOS List: https://docs.google.com/document/d/1gpra...zynXdvmLw/ |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content