[CenturionM]

hi

I have a few questions about the driver for astra h 2.0 OPC ME7.6.2

I read that it is a problematic driver and after read you need to redo the map (unlock), I do not really understand what is going on in this matter

has anyone read and write this driver without any problems?

we care about restoring the original map, will the write be trouble-free?

[carmageddon1970]

i did various of this car, the last one lost communication after 100% success writing and was blocked.

i opened it and i did boot with fgtech/kt200 (896 kb) then i rebuild original file with the obd readout (832 kb fgtech/kt200 and 768 kb kess v1/2) and rewrite...all fine and ecu relive...after this i wrote this ecu with fgtech/kt200 and all fine

[CenturionM]

i did various of this car, the last one lost communication after 100% success writing and was blocked.

i opened it and i did boot with fgtech/kt200 (896 kb) then i rebuild original file with the obd readout (832 kb fgtech/kt200 and 768 kb kess v1/2) and rewrite...all fine and ecu relive...after this i wrote this ecu with fgtech/kt200 and all fine

I need to restore the original map to this driver

do I have to edit the ORi map (borrowed from the internet) to upload it to this driver?


i.e. write and read Bench is indicated?

[carmageddon1970]

if you have ecu working i suggest you to do boot as first…then, based on file size of your file, you can write it with right tool and method