Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom B - Most connector check
24-06-2015, 09:07 AM,
Post: #1
|
|||
|
|||
Icom B - Most connector check
Hi
I have a new Icom A2 B C clone set, is it possible to test the Icom B most connector before program the first ECU (function test). In the forums is much written about non-functioning Icom b clones -> destroyed ecus. Regards |
|||
28-06-2015, 11:11 AM,
Post: #2
|
|||
|
|||
RE: Icom B - Most connector check
Nope... I didn't have a problem with programming my car with a clone Icom... You can plugging it en see if the two green lights work, before programming...
|
|||
28-06-2015, 23:14 PM,
Post: #3
|
|||
|
|||
RE: Icom B - Most connector check
Just connect the ICOM A and B. If the MOST ring is still functional and both lights are green that means the ICOM B is functioning normally (receiving and sending optical signals).
|
|||
08-07-2015, 09:27 AM,
Post: #4
|
|||
|
|||
RE: Icom B - Most connector check
Thank You for the answers
Regards |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content