Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista can not open existing operation.
|
28-10-2023, 08:52 AM,
Post: #1
|
|||
|
|||
|
Ista can not open existing operation.
Hello colleagues.
I have the problem Ista can not open existing operation. Before that I ended the session properly. I copy the entire log to Ista 4.39 and can open the operation. I think it needs to add configuration in ISTAGUI.exe.config file. Any help is appreciated. - Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
29-10-2023, 09:45 AM,
Post: #2
|
|||
|
|||
|
RE: Ista can not open existing operation.
Experiencing the same issue
|
|||
|
|
|
30-10-2023, 05:30 AM,
Post: #3
|
|||
|
|||
|
RE: Ista can not open existing operation.
Try... shutting down the computer, then unplug the OBDII connection for about 20 seconds then reconnect, restart the computer and try again
|
|||
|
|
|
04-11-2023, 20:03 PM,
Post: #4
|
|||
|
|||
RE: Ista can not open existing operation.
(30-10-2023, 05:30 AM)rap_down Wrote: Try... shutting down the computer, then unplug the OBDII connection for about 20 seconds then reconnect, restart the computer and try again this has nothing to do with the connection mate. for example when not connected to car but you want to check again the fault codes or the ecu tree and so on. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
