Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
76 PLA / 3C Lane Change - Errors on VCDS scanning only
20-11-2023, 11:15 AM,
Post: #1
|
|||
|
|||
76 PLA / 3C Lane Change - Errors on VCDS scanning only
Hello,
From some reason each time when performs scan with some diagnostic tool (VCDS, VCP, CarScanner) register these two errors which create error in PLA module and Park Asist is not available until I delete errors in both modules. After deleting, everything works as should on the car. Any idea ? Address 3C: Lane Change Labels: 3Q0-907-566.clb Control Module Part Number: 3Q0 907 566 F HW: 3Q0 907 566 Component and/or Version: MRR1Rear H20 0610 Software Coding: 14C002 Work Shop Code: WSC 01357 011 00200 ASAM Dataset: EV_RearRadarS1BoschVW48X 001007 (VW37) ROD: EV_RearRadarS1BoschVW48X_VW37.rod 2 Faults Found: 1192062 - Databus U1123 00 [00001000] - Received Error Message [databus error value received - PH_Systemzustand] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 6 Fault Frequency: 1 Reset counter: 150 1192264 - Databus U1123 00 [00001000] - Received Error Message [databus error value received - PH_Tongeber_H_verfuegbar] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 6 Fault Frequency: 1 Reset counter: 150 ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
20-11-2023, 11:57 AM,
Post: #2
|
|||
|
|||
RE: 3C Lane Change - Errors on diag scanning
Did you flash them to F?
What year is the car and what car? Full scan? |
|||
20-11-2023, 12:23 PM,
Post: #3
|
|||
|
|||
RE: 3C Lane Change - Errors on diag scanning
(20-11-2023, 11:57 AM)Mex165 Wrote: Did you flash them to F? Tiguan 2018 Yes, I was update 3C and CF from 510E to 610F 2-3 months a go. Like I say, they normally working all time except scanning. I will flash them back to 510E and see if will be better Address 3C: Lane Change (J769) Labels 3Q0-907-566.clb Part No SW: 3Q0 907 566 F HW: 3Q0 907 566 Component: MRR1Rear H20 0610 Revision: -------- Dataset Number: V03935248QZ 0001 Coding: 16C002 Shop #: WSC 00046 000 00000 ASAM Dataset: EV_RearRadarS1BoschVW48X 001007 ROD: EV_RearRadarS1BoschVW48X_VW37.rod Address CF: Lane Chge Asst 2 (J770) Labels:. 3Q0-907-566.clb Part No SW: 3Q0 907 590 F HW: 3Q0 907 590 Component: MRR1Rear H20 0610 Revision: -------- Coding: 16C002 Shop #: WSC 00000 000 00000 ASAM Dataset: EV_RearRadarS2BoschVW48X 001007 ROD: EV_RearRadarS2BoschVW48X_VW37.rod ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
20-11-2023, 15:45 PM,
Post: #4
|
|||
|
|||
RE: 3C Lane Change - Errors on diag scanning
Same issue after rollback to 0510 E on both modules (3C and CF)
----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
24-11-2023, 12:17 PM,
Post: #5
|
|||
|
|||
RE: 3C Lane Change - Errors on VCDS scanning only
UPDATE:
Problem was related on dataset for PLA 3.0 12K. After upgrade module 76 from 3Q0919298B to 3Q0919298E I have apply dataset from mibsolution (76_3Q0919298E_Tiguan.xml) and module work normally without any issues, but make this "bug" with VCDS full scan. I have tested with another dataset from VCP (normal bumper) and this "bug" is solved. VCDS full scan works now without any issue Current working setup: 76 - 3Q0919298E H09 0046 3C - 3Q0907566F H20 0610 CF - 3Q0907590F H20 0610 ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
05-01-2024, 10:41 AM,
Post: #6
|
|||
|
|||
RE: Solved - 3C Lane Change - Errors on VCDS scanning only
Where did you get dataset for side assist 3Q0907566F?
|
|||
05-01-2024, 11:07 AM,
Post: #7
|
|||
|
|||
RE: Solved - 3C Lane Change - Errors on VCDS scanning only
(05-01-2024, 10:41 AM)Mex165 Wrote: Where did you get dataset for side assist 3Q0907566F? I first run with my original "E" dataset and that's worked with "F" software. Later under troubleshooting tested even with "E" dataset from mibsolution and that's also working. However, still have issues with 76 and 3C after VCDS full scan. Found later workaround: After full scan do a "bus rest" (ignition off/ ignition on) and after that 76 and 3C does not complain anymore. Current setup: 76 - 3Q0919298E H09 0046 3C - 3Q0907566G H20 0530 (also working with "E" dataset) CF - 3Q0907590G H20 0530 (also working with "E" dataset) Looking for 3Q0919298F for 76 to try with that, but there is no free in the wild ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
Reputation: +2 - Mex165 [+1] , david99 [+1] | |||
07-01-2024, 08:55 AM,
Post: #8
|
|||
|
|||
RE: 76 PLA / 3C Lane Change - Errors on VCDS scanning only
Flashed mine to F (from G) and did not need to upload dataset!?!?
|
|||
08-01-2024, 11:12 AM,
Post: #9
|
|||
|
|||
RE: 76 PLA / 3C Lane Change - Errors on VCDS scanning only
Are you sure that F 610 is newer than G 530 ?
Because Audi have newer modules and seems at 550 is the latest. Or must be some difference between 5xx and 6xx SW versions ? master: 3Q0907566E H20 0510 3Q0907566F H21 0610 3Q0907566G H25 0530 3Q0907566H H23 0630 3Q0907566J H25 0640 3Q0907566K H26 0540 3Q0907566L H27 0550 slave: 3Q0907590E H20 0510 3Q0907590F H21 0610 3Q0907590G H25 0530 3Q0907590H H24 0630 3Q0907590J H25 0640 3Q0907590K H25 0540 3Q0907590L H27 0550 ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
VCDS Loader (Modded) | jtanner | 5 | 346 |
06-05-2024, 18:24 PM Last Post: justdiag |
|
VCDS 23.11.0 + LOADER | benyclaudiu | 15 | 3,409 |
02-05-2024, 07:15 AM Last Post: koldplayer |
|
VCDS HEX V2 (china) | standaBMW | 0 | 271 |
19-04-2024, 11:32 AM Last Post: standaBMW |
|
NEW VCDS all EU language 23.03.1 | pitercie | 5 | 624 |
17-04-2024, 06:11 AM Last Post: Karlos777 |
|
mechatronic change problem | drjb | 3 | 200 |
05-04-2024, 05:40 AM Last Post: drjb |
|
Request: full VCDS scan Audi S3 2007/2008 | ries | 0 | 131 |
29-02-2024, 20:05 PM Last Post: ries |
|
MY VCDS COLLECTION - ALL YOU NEED I HOPE | fantomel | 77 | 63,245 |
25-02-2024, 11:34 AM Last Post: XuLeTZ |
|
Solved ✔ Errors when trying to install ODIS-E 17.0.1 | luci.deresu | 1 | 243 |
05-01-2024, 23:13 PM Last Post: luci.deresu |
|
Solved ✔ A5 Camera - [Calibration_VIN_mismatch], manual change ? | spooky75 | 10 | 570 |
28-12-2023, 12:12 PM Last Post: spooky75 |
|
Solved ✔ Can I update this VCDS HEX-CAN clone? | jfim88 | 5 | 1,024 |
21-12-2023, 13:56 PM Last Post: jfim88 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content