Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ems3155 change knock detection
23-11-2023, 10:47 AM,
Post: #1
|
|||
|
|||
ems3155 change knock detection
Hello Guys,
i have a problem with a qashqai j11 1.2 . Timing chain was to long so it was replaced. after exchange i did test drive 100km. car runs perfect and no problems then i resetted learning data of camshaft sensor and crankshaft. since then car has mil when you rev for 3 or more seconds on 3000-3200 rpm and says misfire p0303 and p0300. i tested compression changed spark plugs, coil and injector no change. the curious thing is that the car runs perfect really smooth idle and drive no misfire recognizable. Its like resetting values have done something to the ecu. Is somebody who could raise knock detection and delete p0303 and p0300 for testing purposes? In my opinion it detects something where nothing is. |