Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
where is stored HWEL number in KOMBI??? (FSERIES)
07-12-2023, 10:56 AM,
Post: #11
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
Hi! The MB91F467D is closed for reading in the 6wb Kombi. I was able to subtract MB91F467D contents of the only 6WA Kombi. HWEL is in MB91F467D.
|
|||
Reputation: +1 - ruben_17non [+1] | |||
07-12-2023, 11:09 AM,
Post: #12
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
(07-12-2023, 10:56 AM)palapas1974 Wrote: Hi! The MB91F467D is closed for reading in the 6wb Kombi. I was able to subtract MB91F467D contents of the only 6WA Kombi. HWEL is in MB91F467D. OK only way is swap MCU...? You can read with VVDI, without MD wires is possible? Thanks Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
07-12-2023, 11:38 AM,
Post: #13
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
Can try swap.
I use CGPro for read. Connection look at the photo. |
|||
Reputation: +1 - ruben_17non [+1] | |||
07-12-2023, 12:01 PM,
Post: #14
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
(07-12-2023, 11:38 AM)palapas1974 Wrote: Can try swap. Thanks you! I need buy 1kohm for put between sot4 and vcc and i try later read Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
07-12-2023, 12:19 PM,
Post: #15
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
it seems to me that it is not necessary to use resistance, try without it
|
|||
Reputation: +1 - ruben_17non [+1] | |||
07-12-2023, 13:12 PM,
Post: #16
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
(07-12-2023, 12:19 PM)palapas1974 Wrote: it seems to me that it is not necessary to use resistance, try without it True! i make read 6WA M5 2016 work good. 6wb show chip not connected... not have continuity in pad of sin4, try connect directly in chip but same, chip connected, any ideas? or when is locked show not connected? Change HWEL in 6WA and after programm in esys no way, right? because dump of 6wb and write in 6wa sure is difficult to find Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
07-12-2023, 19:55 PM,
Post: #17
|
|||
|
|||
RE: where is stored HWEL number in KOMBI??? (FSERIES)
|