Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
X6 50ix MSD85.1 back to stock
06-12-2023, 19:25 PM,
Post: #1
|
|||
|
|||
X6 50ix MSD85.1 back to stock
Hi guys
I have an N63 with MSD85.1 and the problem is to bring ecu back to stock. The car has been modified and it looks like someone used same custom files mhd/bm3 or whatever it is called with with different pass then original, WINKFP can't flash to the stock as gives me fault SECURITY_ACCESS_DENIED/REQUESTED. With the f series I know how it can be restored to stock if someone uses a custom boodloader with a different authentication key, but the E series is a different league I tried to use the tuning tools HEXPROG/KTAG/KESS/AT, but they didn't go well, as only 3% and error...nothing more can be done. Autohex gave me the password, but whether that helps anything, I don't think so. Does anyone have any ideas on how this could be solved? before I get another ecu. ZB: 08671532 HW: 07649411 • EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
06-12-2023, 19:37 PM,
Post: #2
|
|||
|
|||
RE: X6 50ix MSD85.1 back to stock
have you tried ISTA/p? this engine computer most likely has tuning protection. ISTA/p should be able to reflash it.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content