Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Mini cas3 clone problem
16-12-2023, 13:35 PM,
Post: #1
|
|||
|
|||
Mini cas3 clone problem
Hello,
Have a mini here with cas3. It has the error internal failure on cas. Replaced cas3 with one cas3 from a bmw, cloned it, but with new cas, car also don't start and windshield wipers are always on. CAS3 mini 61.35-9217853-01 CAS3 BMW 61.35-6943834-01 Both have 015ly I need to use a cas3 from mini? Thanks in advance |
|||
17-12-2023, 01:47 AM,
Post: #2
|
|||
|
|||
RE: Mini cas3 clone problem
Post file ori and doner.
|
|||
17-12-2023, 13:34 PM,
Post: #3
|
|||
|
|||
RE: Mini cas3 clone problem
car were also not turning ignition into position 2. same happening with old cas. told the owner probably the problem wasnt neither the cloned nor old cas. with vvdi2 synced cas ->elv and after that ignition turned into position 2 and could start the engine. problem solved.
|
|||
Reputation: +1 - raffy haddad [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
EWS problem | jasonbaby | 6 | 320 |
11-05-2024, 12:18 PM Last Post: johann74270 |
|
simos 8.4 ecu clone | spoool | 5 | 97 |
10-05-2024, 05:41 AM Last Post: ROD-BENDERS |
|
Edc17c54 Crafter Clone | Makson4eg | 4 | 65 |
09-05-2024, 04:05 AM Last Post: pekibg |
|
ELV OFF CAS3 E90 | UnFan | 2 | 125 |
06-05-2024, 22:49 PM Last Post: UnFan |
|
Clone MD1CS003 it does not work | Diagautoecu | 0 | 69 |
05-05-2024, 13:42 PM Last Post: Diagautoecu |
|
cas3 bricked | PIETRO20053 | 3 | 134 |
04-05-2024, 12:02 PM Last Post: mechanior2686 |
|
mercedes EIS W246 PROBLEM | bouizanne | 2 | 43 |
03-05-2024, 08:41 AM Last Post: bouizanne |
|
CAS3+ (0L15Y) PC change PLZ | faraz | 2 | 87 |
02-05-2024, 17:20 PM Last Post: faraz |
|
audi a3 pcr 2.1 clone | bboctavian | 5 | 125 |
02-05-2024, 14:12 PM Last Post: ROD-BENDERS |
|
Mini MG1CS201 | jeroenbmw | 4 | 135 |
02-05-2024, 09:21 AM Last Post: jeroenbmw |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content