[mercuris]

hi can anyone help to check this eeprom 93c66? the mileage is 193605km, possible to help changing the mileage to 130000km? thanks in advance.

i've tried using Tacho231 to calculate but seems unmatch with the eeprom

eeprom pulled with tl866 16bit desolder read

[Clusters]

That is not read as 16 bit, it looks like 8 bit. Either way it is a bad file.

[mercuris]

do i just choose the 16bit and click read? i tried 8bit & 16bit seems like the read result are the same, did i do anything wrong?

[Shadows93]

do i just choose the 16bit and click read? i tried 8bit & 16bit seems like the read result are the same, did i do anything wrong?

Hi all,

mercuris, your dump is bad because you did your reading in 8 bits and not in 16 bits.
To do your reading in 16bits you must select ACE93C66(x16) and not ACE93C66(x8) as in your image.

What you did was just change the visualization of the dump to 8 bits or 16 bits, that was your mistake.

repost your dump in (x16) and we will help you.

[mercuris]

sorry my bad i just found out that as well, being reading with 8bit all along thus its not working, i solved my problem, thanks everyone