Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
SP daten BMW E60 v56 request
08-07-2015, 07:11 AM,
Post: #1
|
|||
|
|||
SP daten BMW E60 v56 request
Hello
I'm need a newest SP daten for BMW E60 with 2006 year. v56 is newest? Please give me a link. I want do update drivers in my BMW. |
|||
08-07-2015, 10:43 AM,
Post: #2
|
|||
|
|||
RE: SP daten BMW E60 v56 request
You need DATEN with DATA or only DATEN?
|
|||
08-07-2015, 10:51 AM,
Post: #3
|
|||
|
|||
RE: SP daten BMW E60 v56 request
I want update all drivers in my E60 so I need all data?
|
|||
08-07-2015, 11:36 AM,
Post: #4
|
|||
|
|||
RE: SP daten BMW E60 v56 request
|
|||
08-07-2015, 11:49 AM,
Post: #5
|
|||
|
|||
RE: SP daten BMW E60 v56 request
Can You give me link with this data and please give me manual... ?
|
|||
08-07-2015, 11:56 AM,
Post: #6
|
|||
|
|||
RE: SP daten BMW E60 v56 request
Is large file, if you post inpa "screen capture" with all module´s of your car. i can upload only DATA for your car.
screen capture like this: Guide for update modules with winkfp 1. Go into INPA and print off the complete UIF page with ZB# and programming info. 2. Close INPA completely and launch WinKFP. 3. I use comfort mode since it does everything that I need it to do. 4. Once you are in comfort mode, Click on Choose ZUSB and make sure that the programming data is loaded in there. If you dont have any data in there you will need to load it before you proceed to the next step. 5. Close the window that is showing the programming data and click on Enter Vin, Enter your complete VIN # of the car you are programming, and click OK, Vin will show up at the top of the program if it accepted it. 6. Click on Enter ZUSB and enter the ZB# from the UIF printoff from INPA, and click ok. 7. It should load the next window and show the module # and something in the right screen. You can leave those as default and click ok. 8. Click on Done, which will bring you to the programming page. 9. Make sure you car is hooked up to a battery charger before you start the programming. 10. Once you have everything good to go click on program and sit back and relax, it will go through and will say " You have 1 time left to program this ECU" click OK and it will flash it. |
|||
08-07-2015, 12:04 PM,
Post: #7
|
|||
|
|||
RE: SP daten BMW E60 v56 request
Ok I do later and paste it.
Where in INPA is button for all module´s of my car? |
|||
08-07-2015, 18:11 PM,
Post: #8
|
|||
|
|||
RE: SP daten BMW E60 v56 request
My versions are:
Please give me pack newest versions to my E60 and write me how can I update it? Thanks |
|||
08-07-2015, 20:50 PM,
Post: #9
|
|||
|
|||
RE: SP daten BMW E60 v56 request
|