[db8000]

Hi im looking for DAS (Star Diagnosis) OLD GOLDEN Version 10-2008

and some one who could make this for me whit tv

[silentwarrior]

Here!
torrent file

[db8000]

Could some one help me to install das 10-2008

[sergiulino]

Bekomme es nicht installiert. bei der installation kommt die meldung das keine lizenz gefunden wurde.
wie bekomme ich die liezenz?

Hey bro! We here use English
Look a little here at number1: http://garage-automotive.com/showthread.php?tid=245

[andy_speedy]

Sorry . I'm looking for an installation guide for this release . and where do I get the key ?

[bison225]

1. Install Windows XP with service pack 3 and create two users with administrator privileges OWNER and STAR.
2. Partition your hard drive like this:
C: minimum 15 GB of free space, 20 GB recommended
D: minimum 5 GB of free space
E: minimum 5 GB of free space, 20 GB recommended if you will be installing WIS later
F: minimum 20 GB of free space
You can use any partitioning software, but make sure drive letters match! If you are looking for partitioning software, EASUS Partition Master Free or MiniTool Partition Wizard Home Edition are free and should do the job.
3. Set your date to be no more than one month after STAR DVD release.
4. Run prepare.bat file and follow it's instructions.
5. Place the STAR DVD into laptop drive.
6. Launch G:\stardiag\setup.exe file (assuming your DVD drive letter is G). Installation may finish immediately and ask you to reboot your computer. Let it do it and launch setup again after reboot. Once installation starts, ignore error -6003 (if it occurs). Just press OK to continue installation process.
7. If you need to repeat DAS installation using another language, do it before proceeding to the next step.
8. Once your DAS will be installed, do not press finish button to reboot your computer. Launch included file after installation.bat.
9. Navigate to: Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right click on that COM port you have left enabled and and select Properties.
Go to Port Settings tab and set these values:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control : None
Then click on Advanced... button and make sure Use FIFO buffers are checked and COM Port Number is set to COM2.
Press OK and close Device manager.
10. Reboot your computer. If you find your STAR user account is locked then try this password: User$star2004. If it does not work, log into your other account (OWNER) and remove the password for user STAR.
11. You will probably need to apply some DAS fixes. You will find them in DAS fixes folder.

GOOD LUCK!

[andy_speedy]

Hello There,
Thanks for the answer. Have one more question :
Where can I get the prepare.bat ?

[Pluto]

Look to an early Zolookas Guide---- like "c" and also make sure that you have Compact3 in your reg then change back to COMPACT4---all of his guides include all the prepare/afterinstall bat files with appropriate fixes.

[cadbob]

File not available

[Joe2]

Could anybody share all needed files and manuals for correct instalation of das 2008 ?