[sein14]

Hello.
the car is Nissan interestar 2.5dci 150cv year 2007, edc16
They have a file with dpf Off and bad starts, accelerated and stops, fails DF053
I recorded the original file, but does the same and gives the same error
anyone know the solution?
regards

[rs@chip]

Try this shuld work..

[mike_service]

Hi
Your dtc DF053 (RAIL PRESSURE REGULATION) it not a checksum problem on this orig file,also i have check it both dpf off file from your second post,dpf off 1 file are the same like original and dpf off 2 are without checksum !
the problem are when you have writed the file,check if injectors still are coded in ecu !
also check injectors for leaks or maybe fuel pressure regulator are damage !

Mike

[sein14]

I think it is problem of coding of injectors, no problem of chk

the whole problem started after loading the modified file
before writing the modified file. I did a reading of encoded injectors, but when writing the problem remains the same

I also put the code of each injector through the machine diagnosis but still the same.

[comawi]

Hello.
the car is Nissan interestar 2.5dci 150cv year 2007, edc16
They have a file with dpf Off and bad starts, accelerated and stops, fails DF053
I recorded the original file, but does the same and gives the same error
anyone know the solution?
regards

Is your ecu edc 16c36

[BPCD]

Hello,

I know this problem i had it before.
White me after programming the code of the injectors were gone.
Atfer programming the good injctor codes the car do not start.

The problem was the diesel pomp self.
For this car there are two types of dieselpomps.
After programming the wrong dieselpomp is select.
You can go to the dealer and expane whats wrong and thy can select the good dieselpomp.

BR stefan

[comawi]

Bpcd have write ok that is your problem i have same problem with opel vivaro edc 16c36 with opcom you can fix the problem and choice another pump

[sein14]

I can do with autocom?

[comawi]

No only orginal tool

[mike_service]

No only orginal tool

Hi
Can recode injectors with Autocom/Delphi,also ESI KTS can do it...dont need only dealer tool
One free software to recode injectors are DDT2000


Mike