[eXslide89]

Hello,
I hope to find help here.
I have just read out a BMW e88 120d via OBD and foxflash. Then edited the file with a size of 2048KB with Davinci and deactivated DPF, EGR. I then wrote the edited file back into the vehicle via OBD. I received an error and since then the vehicle no longer starts.
I have now also removed the control unit and read about Bench, but no matter what I write now, it won't start.
The DDE can no longer be controlled with Ista and Inpa
Can anyone help me?

---

[Rager98]

please upload files in your message as rar files.

[eXslide89]

Enclosed is the Rar file.

[wjgud123]

Did you edit file which was read from car? according to details:
Bench int flash/eeprom etc -> 14.01.2024
OBD file -> 25.09.2022

You write random file and brick ecu.

[rece1p23]

Hello,
I hope to find help here.
I have just read out a BMW e88 120d via OBD and foxflash. Then edited the file with a size of 2048KB with Davinci and deactivated DPF, EGR. I then wrote the edited file back into the vehicle via OBD. I received an error and since then the vehicle no longer starts.
I have now also removed the control unit and read about Bench, but no matter what I write now, it won't start.
The DDE can no longer be controlled with Ista and Inpa
Can anyone help me?

---

Hello, can you try this file and let me know?

[eXslide89]

i wanted to deactivate dpf and agr with davinci and return to i
again via OBD. An error occurred. Then I tried it via bench but the vehicle won't start

[murkutis]

this ecu not safe via OBD, always do bench.

[wjgud123]

this ecu not safe via OBD, always do bench.

never have problem via ODB.... edc17 is VR

[murkutis]

im using dfox original tool and some cp02/06 after write not accepting, so without turning ignition off, you need to rewrite original file and do bench

[uh60]

Try to flash it with WinKFP.